Data Sheet

ManualsBrandsLAPP ManualsCables & WiresLAPP 0031066 Data cable UNITRONIC® 100 CY 4 x 0.25 mm² Grey 100 m

U.I. Lapp

GmbH

DATA SHEET

UNITRONIC 100 CY

DB0034006

valid from: 07.08.2013

Originator: PESA / PDC

approved: HAPF / PDC

Document: DB0034006DE page 1 of 1

PD 0019/2.2_11.10EN

Application

UNITRONIC

 100 CY

is a screened control and signal cable with small cross

sections for fixed installation as well as

occasional flexing at free, non-continuously recurring movement without tensile load. It is used in dry, damp and wet

interiors but it is not appropriate for outside usage.

The cables are used in the milliampere range for computer systems, electronic control equipment, office machines,

balances etc. and wherever the thinnest possible control cables are required.

Design

Conductor

fine wire strands of bare copper wires

Insulation

special PVC

based compound

Core identification code

according to UNITRONIC

 colour code

Stranding

cores are stranded in layers

Inner sheath

special PVC

based compound

colour: grey (RAL 7001)

Screen

Braiding with tinned copper wires

Outer sheath

special PVC

based compound

colour: grey (RAL 7001)

Electrical properties at 20°C

Conductor resistance

0.14

0.25

0.34

mm²

148.0

79.9

57.5

Ω/km

max.

Specific insulation resistance

> 20 G

Ω x cm

Mutual capacitance

C/C: approx. 120 nF/km

C/S: approx. 160 nF/km

(at 800 Hz)

Inductivity

approx. 0.65 mH/km

Peak working voltage

0.14 mm²: 350 V (not for power applications)

≥ 0.25 mm²: 500 V (not for power applications)

Test voltage

0.14 mm²: 1200 V

≥ 0.25 mm²: 1500 V

Mechanical and thermal properties

Minimum bending radius

Flexing: 20 x cable Ø

Fixed installation: 6 x cable Ø

Temperature range

Flexing:

˚C up to +70˚C

Fixed installation: - 40˚C up to +80˚C

Flammability

flame retardant acc. to IEC 60332

EC directive

This cable is conform to the EC

Directive 2002/95/EC

(RoHS, Restriction of the use of certain hazardous substances).

Design based on standard VDE 0812

Summary of content (1 pages)

PAGE 1
U.I. Lapp GmbH DATA SHEET UNITRONIC 100 CY DB0034006 valid from: 07.08.2013 Application UNITRONIC 100 CY is a screened control and signal cable with small cross-sections for fixed installation as well as occasional flexing at free, non-continuously recurring movement without tensile load. It is used in dry, damp and wet interiors but it is not appropriate for outside usage. The cables are used in the milliampere range for computer systems, electronic control equipment, office machines, balances etc.