Data Sheet

U.I. Lapp
GmbH
DATA SHEET
JE-Y(ST)Y...BD EB
DB0034120
valid from: 23.11.2012
Originator: PESA / PDC
approved: HAPF / PDC
Document: DB0034120DE page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
JE
-
Y(ST)Y...BD EB
is a connecting cable for industrial electronics. It can be used in measurement and control
engineering and also as pulse and data transmission cable.
With the blue outer sheath the cable is designed for the installation of intrinsically safe circuits in hazardous (explosive)
areas.
The cable meets the requirements of VDE 0165 part 1 where a special marking for cables of hazard type “i”
(intrinsically safe) is specified.
The cable is manufactured according to DIN VDE 0815. The requests for make-
up and electrical quality of this norm are
fulfilled.
The cable is intended for use in dry and damp interiors and for fixed installation.
Design
Outer sheath
Colour of the sheath: sky blue (RAL 5015)
Electrical properties at 20°
Loop resistance
max. 73.2
Ω/km
Insulation resistance
> 100 M
Ω x km
Mutual capacitance
100 nF/km
Inductivity
0.65 mH/km
Capacitive coupling
200 pF/100 m
Peak working voltage
225 V
(not for power applications)
Test voltage
C/C: 500 V
C/S: 2000 V
Mechanical and thermal properties
Bending radius
Fixed inallation: 6 x cable Ø
Temperature range
Fixed installation:
-
40
˚C up to +70˚C
Flammability
flame retardant acc. to IEC 60332
-
1
-
2
EC directive
This cable is conform to the EC
-
Directive 2002/95/EC and 2011/65/EC
(RoHS, Restriction of the use of certain hazardous substances).
Design based on standard DIN VDE 0815, Table 4, Type JE
-
Y(ST)Y...BD
Electrical properties based on standard DIN VDE 0815, Table 10, Type JE-Y(ST)Y…BD
Tests at the cable based on DIN VDE 0815, Tabelle 21