Datasheet

0034302
DATA SHEET
valid from:
01.01.2019
Creator: PESA / PDC
Released: ALTE / PDC
Document: DB0034302EN
Version: 05
Page 1 of 1
We reserve all rights according to DIN ISO 16016.
PD 0019/05_04.18EN
Application
is a screened data cable for low frequency applications. The cable is designed for fixed installation and for conditional
flexible use. It is used in dry and damp interiors but not appropriate for outside usage.
The screen provides protection against electromagnetic interferences.
The cable is used for example in computer systems, instrumentation technology, office equipment and balances.
Design
Design
Design based on standard VDE 0812
Conductor
fine wire strands of bare copper wires
Insulation
special PVC-based compound
Core identification code
according to DIN 47100
Stranding
cores are stranded in layers,
wrapping with foil on the outer layer
Screen
Braiding with tinned copper wires
Outer sheath
special PVC-based compound
colour: grey (similar RAL 7032)
dlsafjlöj f
Electrical properties at 20°C
Specific volume resistivity
> 20 G Ω x cm
Mutual capacitance
C/C: approx. 120 nF/km
C/S: approx. 160 nF/km
(at 800 Hz)
Inductance
approx. 0.65 mH/km
Peak operating voltage
0.14 mm²: 350 V (not for power applications)
≥ 0.25 mm²: 500 V (not for power applications)
Test voltage
0.14 mm²: 1200 V
≥ 0.25 mm²: 1500 V
Mechanical and thermal properties
Minimum bending radius
Flexing: 15 x cable Ø
Fixed installation: 6 x cable Ø
Temperature range
Flexing: - 5˚C up to +70˚C
Fixed installation: - 40˚C up to +80˚C
Flammability
flame retardant acc. to IEC 60332-1-2
General requirements
This cable is conform to the EU-Directive 2011/65/EU
(RoHS, Restriction of the use of certain hazardous substances).