Data Sheet

DATA SHEET
0065101
ÖLFLEX
®
HEAT 180 SiF/GL
valid from :
10.12.2007
elaborated by:
TE-K: M. Herb / R. Krämer
Document: DB0065101EN page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX

HEAT 180 SiF/GL are silicone-single cores with glass fibre braiding and recommended for use in the
case of raised ambient temperatures under sufficient ventilation and small mechanical stress. In the case of room
temperature, ÖLFLEX

HEAT 180 SiF/GL is largely resistant against oil, alcohol, acids, caustic solutions, salt
solutions and salt water.
Design
Conductor tinned copper strands in acc. to IEC 60228 resp. VDE 0295, class 5
Core insulation Silicone based compound EI2 acc. to HD 22.1 resp. VDE 0282-1
Core covering lacquered glass fibre braiding
Electrical properties at 20 °C
Nominal voltage 300 / 500 V
Test voltage 2000 V AC
Mechanical and thermal properties
Temperature range -50 °C up to +180 °C max. conductor temperature
pay attention to sufficient ventilation, if ignoring
the max. conductor temperature is +100 °C.
Min. bending radius 6 x cable diameter for fixed installation
15 x cable diameter for flex. applications
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
after combustion a SiO2-ash skeleton remains, which has still
good insulation properties but has no more any mechanical stability.
Halogen-free acc. to IEC 60754-1 resp. VDE 0472 part 815
Corrosivity acc. to IEC 60754-2 resp. VDE 0482 part 267-2-3
Tests in acc. to IEC 60811-x-x resp. VDE 0473 part 811-x-x, VDE 0472
EC directive this cable confirms to ECD 2006/95/EC
(low voltage directive).