Data Sheet

DATA SHEET

0068000

ÖLFLEX

HEAT 180 SiD

valid from :

10.12.2007

elaborated by:

TE-K: M. Herb / R. Krämer

Document: DB0068000EN page 1 of 1

Nr.: 0019/0894

Application

ÖLFLEX

HEAT 180 SiD are silicone-single cores and recommended for use in the case of high ambient tem-

peratures under sufficient ventilation and low mechanical stress. In the case of room temperature,

ÖLFLEX

HEAT 180 SiD is largely resistant against oil, alcohol, acids, caustic solutions, salt solutions and salt

water.

Design

Conductor solid conductor made of tinned copper

Core insulation Silicone based compound EI2 acc. to HD 22.1 resp. VDE 0282-1

Core identification coloured

Electrical properties at 20 °C

Nominal voltage 300 / 500 V

Test voltage 2000 V AC

Mechanical and thermal properties

Temperature range -50 °C up to +180 °C max. conductor temperature

pay attention to sufficient ventilation, if ignoring

the max. conductor temperature is +100 °C.

Min. bending radius 10 x cable diameter for fixed installation

Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2

after combustion a SiO2-ash skeleton remains, which has still

good insulation properties but has no more any mechanical stability.

Halogen-free acc. to IEC 60754-1 resp. VDE 0472 part 815

Corrosivity acc. to IEC 60754-2 resp. VDE 0482 part 267-2-3

Tests in acc. to IEC 60811-x-x resp. VDE 0473 part 811-x-x, VDE 0472

EC directive this cable confirms to ECD 2006/95/EC

(low voltage directive).

PAGE 1
DATA SHEET ÖLFLEX® HEAT 180 SiD 0068000 valid from : 10.12.2007 Application ® ÖLFLEX HEAT 180 SiD are silicone-single cores and recommended for use in the case of high ambient temperatures under sufficient ventilation and low mechanical stress. In the case of room temperature, ® ÖLFLEX HEAT 180 SiD is largely resistant against oil, alcohol, acids, caustic solutions, salt solutions and salt water. Design Conductor solid conductor made of tinned copper Core insulation Silicone based compound EI2 acc.