Datasheet

U.I. Lapp
GmbH
DATA SHEET
H1Z2Z2-K
DB 1023550
valid from: 25.04.2016
Originator: ALTE / PCM
approved: HAPF / PDC
Document: DB1023550EN
page 1 of 2
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
1. Application
H1Z2Z2-K cables are weather-, abrasion- and UV-resistant photovoltaic cables.
These cross-linked, halogen free and double insulated solar cables are suitable for permanent outdoor use and especially
for the interconnection of grounded and ungrounded photovoltaic power systems. They are applicable for the connection
of solar panels among themselves and as extension cable between the individual module strings or the DC/AC inverter.
According to DIN EN 50618 applies:
The expected period of use under normal usage conditions as specified in DIN EN 50618 is at least 25 years.
2. Cable design
Design according to DIN EN 50618
Certification Code designation H1Z2Z2-K, certified according to DIN EN 50618
TÜV Rheinland certificate No. R 60109128
1. Conductor: Fine wire strands of non-porous tinned copper wires according to IEC 60228, Class 5
2. Core insulation: Cross-linked polymer compound, halogen free
Colour: white
3. Outer sheath: Cross-linked Co-Polymer, halogen free and flame retardant
Outer sheath colour: black or red or blue
3. Electrical properties
Rated voltage U
0
/U acc. IEC AC 1000/1000 V
DC 1500/1500 V
Max. permissible operating voltage DC 1800 V (according to DIN EN 50618)
Test voltage AC 6,5 kV
Current carrying capacity according to EN 50618, Table A.3 & A.4
4. Mechanical and thermal properties
Temperature range fixed installation: -40°C up to +120°C
(according to IEC 60216-2)
Temperature range according fixed installation: -40°C up to +90°C ambient temperature
(according to DIN EN 50618)
Minimum temperature for installation -25°C (according to DIN EN 50618)
Minimum bending radius occasional flexing: 15 x cable diameter
fixed installation: 5 x cable diameter