Data Sheet

ManualsBrandsLAPP ManualsCable CarriersLAPP 1026778 Drag chain cable ÖLFLEX® CHAIN 809 CY 5 G 1.50 mm² Grey Sold by the metre

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

CHAIN 809 CY

DB 1026751

valid from: 2014-02-21

Originator: KASC1 / PDC

Approved: HAPF / PDC

Dokument: DB1026751EN

Page 1 of 2

PD 0019/2.2_11.10EN

Application

ÖLFLEX



CHAIN 809 CY cables are high-flexible PVC power and control cables designed for the European, North American

and Canadian market, for flexible use and fixed installation under light or medium mechanical load conditions. They are

among others designed for use in dry, damp or wet rooms. Outdoor use: They may only be installed with UV protection and

considering the indicated temperature range. At room temperature they are widely resistant to acids, caustic solutions and

certain oils. They are especially suitable for basic requirements (Basic Line) in power chains and in permanently moved ma-

chine parts. Usage of these cables in moving cable carriers or on motor drum guidance or under a tensile strain of more

than 15 N/mm

conductor cross-section is not allowed. The screen is a protection against electrical interference.

Application range:

Power chains or moving machine parts, measuring, control and regulation circuits, wiring of machines, tools, devices,

appliances and control cabinets.

USE acc. to UL: PVC sheathed cable for external interconnection or internal wiring of electronic equipment.

USE acc. to cRU: Cables for internal wiring or external interconnection with or without mechanical abuse.

This cable is suitable for torsion application in wind turbines (WTG). The torsional load is limited to applications, as they

typically occur in the loop of a wind turbine.

Design

Design acc. to UL AWM Style 20886, CSA C22.2 No. 210-05 and

based on HD 21.13 S1 +A1 resp. VDE 0281-13

Approval UL AWM Style 20886 (File No. E63634)

cRU AWM I A/B, II A/B (File No. E63634)

Conductor fine wire strands of bare copper acc. to IEC 60228 resp. VDE 0295, Class 5

Core insulation PVC compound (UL/CSA 80° C rating)

Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor

black cores with white numbers

acc. to DIN EN 50334 resp. VDE 0293 part 334

Taping non-woven wrapping

Screen braid of tinned copper wires, coverage = 85% (nominal value)

Outer sheath PVC compound (UL/CSA 80° C rating)

Colour: Grey, similar RAL 7001

Electrical properties

Nominal voltage U

/U: 300/500 V

UL/CSA: 1000 V

Test voltage Core/Core: 4000 V AC

Core/Screen: 2000 V AC

Mechanical and thermal properties

Min. bending radius fixed installation: 4 x cable diameter

flexing up to 3m travel distance (horizontal, self supporting): 10 x cable diameter

flexing up to 10m travel distance (horizontal, sliding): 12 x cable diameter

Number of bending/ unbending

cycles 2 mio. cycles

Travel distance 10 m

Summary of content (2 pages)

PAGE 1
DATA SHEET U.I. Lapp GmbH ÖLFLEX® CHAIN 809 CY DB 1026751 valid from: 2014-02-21 Application ÖLFLEX CHAIN 809 CY cables are high-flexible PVC power and control cables designed for the European, North American and Canadian market, for flexible use and fixed installation under light or medium mechanical load conditions. They are among others designed for use in dry, damp or wet rooms. Outdoor use: They may only be installed with UV protection and considering the indicated temperature range.
PAGE 2
DATA SHEET U.I. Lapp GmbH DB 1026751 ÖLFLEX® CHAIN 809 CY valid from: 2014-02-21 Temperature range fixed installation (VDE): fixed installation(UL/CSA): flexing (VDE): flexing (UL/CSA): Torsion movement in WTG TW-0 (5000 cycles at ≥ +5°C) TW-1 (2000 cycles at ≥ -20°C) ± 150 °/m at 1 revolution per minute Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2 UL: Vertical flame test VW-1; CSA: FT1 Oil resistance TM54 acc. to DIN EN 50290-2-22 Tests acc. to IEC 60811 resp.