Data Sheet

U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
191
DB 0011113
valid from: 2013-11-08
Originator:
KASC/
PDC
Approved: HAPF / PDC
Document: DB0011113EN page 1 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX

191 cables are oil resistant control cables for the European, Northern American and Canadian market for occa-
sional flexible use and fixed installation subject to normal mechanical load conditions. They are among others designed for
use in dry, damp and wet conditions. Outdoor use: They may only be installed with UV protection and considering the tem-
perature range. ÖLFLEX 191 cables are increased oil resistant and at room temperature widely resistant against acid and
caustic solutions. They are suitable for non-continuously recurring movement without tensile load. Continuous operational
movements, restricted guidance, usage of these cables in moving cable carriers or on motor drum guidance or under a strain
of more than 15 N/mm² are not allowed.
Application range: Plant engineering, industrial machinery, heating and air-conditioning systems
USE according to UL: PVC sheathed cables for external interconnection or internal wiring of electronic equipment,
appliances where exposed to oil at a temperature not exceeding 80° C
USE according to CSA: I A/B and II A/B. Cables for internal wiring or external interconnection with or without
mechanical abuse
Design
Design acc. to UL 758; Style 10012 and 21098
CSA AWM C22.2 No. 210-11
based on DIN EN 50525-2-51/ VDE 0285-525-2-51
Approval UL UL AWM, Style 10012 and 21098 or 2587 (File No. 63634)
CSA AWM I A/B, II A/B (File No. LL 53776)
Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5
Core insulation PVC compound (UL/CSA 90°C rating)
Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor
black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334
Outer sheath PVC compound ((UL / CSA 90°C Rating)
Colour: silver grey, similar RAL 7001
Electrical properties
Nominal voltage VDE: U
0
/U 300 / 500 V
UL/CSA 600 V
Test voltage C / C >4000 V AC
Specific insulation resistance > 20 GΩ x cm
Mechanical and thermal properties
Min. bending radius occasional flexing: 20 x outer diameter
fixed installation: 6 x outer diameter
Temperature range occasional flexing (VDE): -5 °C up to +70 °C max. conductor temp.
occasional flexing (UL/CSA): -5 °C up to +90 °C max. conductor temp.
fixed installation (VDE): -40 °C up to +70 °C max. conductor temp.
fixed installation (UL/CSA): -40 °C up to +90 °C max. conductor temp.