Data Sheet

U.I. Lapp
GmbH
DAT
A SHEET
ÖLFLEX
®
CLASSIC 130 H
DB 1123000
valid from: 2013-07-31
Originator: KASC / PDC
approved: HESC / PDC
Document: DB1123000EN Page 1 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX
®
CLASSIC 130 H are halogen free, highly flame retardant control cables, designed for the European and North
American market, for occasional flexible use and fixed installation subject to normal mechanical load conditions. They are
among others designed for use in dry, humid or wet conditions. Considering the temperature range, a temporary outdoor
use is possible. They are suitable for non-continuously recurring movement without tensile load. Continuous operational
movements, restricted guidance, usage of these cables in moving cable carriers or on motor drum guidance or under a strain
of more than 15 N/mm² are not allowed.
Application range:
ÖLFLEX
®
CLASSIC 130 H can be used in public facilities, airports, railway stations, plants engineering and constructions, air
conditioning systems and particularly where human and animal life as well as valuable property are exposed to high risk of
fire hazards.
USE acc. to UL: FRPE sheathed cable for internal wiring of appliances and external interconnection of electronic equipment
Design
Design acc. to UL AWM 758, Style 21089 and
based on EN 50525-3-11 resp. VDE 0285-525-3-11
Approvals UL AWM 758, Style 21089 (File No. E63634)
Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5
Core insulation halogen free compound TI6 acc. to
EN 50363-7 resp. VDE 0207-363-7
Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor
black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334
Outer sheath halogen free compound TM7 acc. to EN 50363-8 resp. VDE 0207-363-8
color: silver grey, similar RAL 7001
Electrical properties
Nominal voltage VDE U
0
/ U: 300 / 500 V
UL: 600 V
Test voltage Core / Core: 4000 V AC
Mechanical and thermal properties
Min. bending radius occasional flexing: 15 x outer diameter
fixed installation: 4 x outer diameter
Temperature range occasional flexing (VDE): -15 °C up to +70 °C max. conductor temp.
occasional flexing (UL): -15 °C up to +75 °C max. conductor temp.
fixed installation (VDE): -40 °C up to +80 °C max. conductor temp.
fixed installation (UL): -40 °C up to +75 °C max. conductor temp.
Flammability flame retardant acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
UL: Cable flame test
flame propagation acc. to IEC 60332-3-24 resp. VDE 0482-332-3-24 or
IEC 60332-3-25 resp. VDE 0482-332-3-25