Data Sheet

U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
CLASSIC 110 CY
DB 1135752
valid from: 2013-03-08
Originator: KASC / PDC
approved: HAPF / PDC
Document: DB1135752EN
Page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX

CLASSIC 110 CY cables are VDE approved power and control cables for occasional flexible use and fixed installa-
tion under normal mechanical load conditions. They are among others designed for use in dry, damp and wet conditions.
They may only be installed outdoors with UV protection and considering the temperature range. At room temperature they
are widely resistant to acids, caustics solutions and certain oils. ÖLFLEX

CLASSIC 110 CY cables are used as supply and
interconnecting cable, suitable for freely moved without forced guidance and tensile stress. The screen is a protection
against electrical interference.
Application range:
plant engineering, industrial machinery, heating and air conditioning systems, conveyor and transport systems
Design
Design based on
EN 50525-2-51 resp. VDE 0285-525-2-51 / HD 21.13 S1 + A1 resp. VDE 0281-13
Approval VDE-REG.-Nr. 7030
Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5
Core insulation PVC compound TI2 acc. to EN 50363-3 resp. VDE 0207-363-3 with increased
requirements acc. to Lapp specification
Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor
black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334
Inner sheath PVC compound TM2 acc. to EN 50363-4-1 resp. VDE 020-363-4-1
colour: silver grey, similar RAL 7001
Screen braid of tinned copper, coverage = 85 % (nominal value)
Outer sheath PVC compound TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1
colour: transparent
Electrical properties
Nominal voltage U
0
/U: 300 / 500 V
Test voltage Core/Core: 4000 V AC
Core/Screen: 4000 C AC
Transfer impedance at 30 MHz: max. 250mΩ/m
Mechanical and thermal properties
Min. bending radius occasional flexing: 20 x outer diameter
fixed installation: 6 x outer diameter
Temperature range occasional flexing: -5 °C up to +70 °C max. conductor temp.
fixed installation: -40 °C up to +80 °C max. conductor temp.
Flammability flame retardant in acc. with IEC 60332-1-2 resp. VDE 0482-332-1-2
Tests acc. to IEC 60811, EN 50395, EN 50396
EC-Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive)
and 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances).