Data Sheet

DATA SHEET
1136752
ÖLFLEX
®
CLASSIC 115 CY
valid from :
16.10.2006
elaborated by:
TE-K: M. Herb / O. Bautin
Document: DB1136752EN page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX

CLASSIC 115 CY cables are control cables for flexible use and fixed installation for medium
mechanical use. They are for use in dry, damp and wet rooms. They may only be installed outdoors with UV
protection and in observation of the temperature range. At room temperature it is generally resistant against
acids, caustics solutions and certain oils. ÖLFLEX

CLASSIC 115 CY cables are used as supply and
interconnecting cable for controlling machine tools, production lines, control equipment on conveyors, also for
use in measuring regulating and computer units. Suitable for freely moved without forced guidance and tensile
stress. The screen is a protection against electrical interference.
Technical data
Design in accordance to HD 21.13S1 that is VDE 0281-13
Conductor bare copper, fine wire strand in accordance to IEC 60 228
that is VDE 0295, class 5
Core insulation LAPP special PVC compound P8/1, better than the PVC compound TI2 in
accordance to HD 21.1 that is VDE 0281 part 1
Identification in acc. to HD 186 resp. VDE 0293, black cores with
white numbers with or without green/yellow ground conductor
Wrapping insulated foil of plastic
Screen braid of tinned copper, coverage = 85 % (nominal value)
Outer sheath PVC compound TM2 in acc. to HD 21.1 that is VDE 0281 part 1 with increased
requests to LAPP specification
Nominal voltage 300 / 500 V
Test voltage 4000 V AC
Temp. range for flexible use -5 up to +70° C max. conductor temperature
fixed installation -40 up to +80° C max. conductor temperature
Min. bending radius flex. use : 20 x cable diameter
fixed installation: 6 x cable diameter
Flame retardant in acc. to IEC 60 332.1
Tests in acc. to VDE 0472 and IEC 60 811-x.x that is VDE 0473
EC directive This cable confirms to ECD 73/23/EEC (low voltage directive).