Brochure

U.I. Lapp
GmbH
PRODUCT INFORMATION
NYM-J
05.11.2015
PN 0486/01_03.10
Standard cable for plaster, brickwork and immovable concrete
Info
Standard cable for plaster and brickwork
Application range
For installation on or under the plaster
In bricks and concrete, except direct embedding in vibrated or compressed concrete
In dry, damp or wet interiors
Also suitable for outdoor use if protected against direct sunlight
Product Make-up
Bare copper wire conductor
Core insulation: Based on PVC
Filling compound over the core assembly
Outer sheath: Based on PVC
Norm references / Approvals
VDE 0250 Part 204
Product features
Flame-retardant according IEC 60332-1-2
Remark
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon
request.
Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related
surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
Photographs are not to scale and do not represent detailed images of the respective products.
Product Management Document: LAPP_PRO184EN.pdf
1 / 3
©2012 Lapp Group - Technical changes reserved
Photographs are not to scale and do not represent detailed images of the respective products.