Data Sheet

U.I. Lapp
GmbH
DATA SHEET
H05RN-F (X05RN-F)
DB1600250EN
valid from: 2011-05-31
Originator: T. Merker / PCM (PD-KL)
Document: DB1600250EN page 3 of 4
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
MECHANICAL, THERMAL AND CHEMICAL PROPERTIES
Conductor temperature range (HD 516/VDE 0298-300) -25°C to +60°C
Maximum cable surface temperature (HD 516/VDE 0298-300) +50°C
Minimum bending radii (HD 516/VDE 0298-300) (in case of double-core, noncircular H05RN-F acc. HD
22.8/VDE 0282-8: according to the outer cable diameter measured in the equally aligned direction like
the bending):
o Fix installation:
o OD* ≤ 12 mm 3 x OD*
o 12 mm < OD* ≤ 20 mm 4 x OD*
o Moved freely:
o OD* ≤ 12 mm 4 x OD*
o 12 mm < OD* ≤ 20 mm 5 x OD*
o At the insertion of movable devices and equipment without mechanical stress on the cable:
o OD* ≤ 12 mm 4 x OD*
o 12 mm < OD* ≤ 20 mm 5 x OD*
o Mechanically stressed and at repeated wrapping (acc. HD 516/VDE 0298-300: only light me-
chanical stress allowed for H05RN-F/X05RN-F):
o Independently from the outer cable diameter 6 x OD*
Flame retardance IEC 60332-1-2 (acc. HD 22.4/
VDE 0282-4 or HD 22.8/VDE
0282-8)
Ozone resistance Not ozone-resistant! (Outer
sheath compound EM 2 acc.
HD 22.1/VDE 0282-1)
Oil resistance EN 60811-2-1/VDE 0473-811
-2-1, 10. (Outer sheath com-
pound EM 2 acc. HD 22.1/
VDE 0282-1)
Heat strain of the outer sheath EN 60811-2-1/VDE 0473-811
-2-1, 9. (Outer sheath com-
pound EM 2 acc. HD 22.1/
VDE 0282-1)
Cold bending of the outer sheath EN 60811-1-4/VDE 0473-811
-1-4, 8.2 (Outer sheath com-
pound EM 2 acc. HD 22.1/
VDE 0282-1)