Data Sheet

U.I. Lapp
GmbH
DATA SHEET
ETHERLINE
®
P Cat. 5e 2x2x24/1 AWG
DB2170281
valid from: 25.03.2014
Originator: RAWE/PDC
approved: HAPF/PDC
Document: DB2170281
page 1 of 2
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10DE
Application
ETHERLINE® P Cat. 5e 2x2x24/1 AWG is a CATEGORY 5e high speed data transmission cable for industrial environments.
This data cable meets the requirements of Standards EIA/TIA-568, TSB-36 and ISO/IEC 11801 „Generic Cabling for Cus-
tomer Premises“ for CLASS D Links. The high quality screen ensures high transmission reliability of data transfer in electro-
magnetically polluted areas. The PUR sheath is widely resistant against mineral oils and abrasion. The cable is intended for
fixed installation in dry and damp interiors and outdoors.
Approvals: UL AWM styles 11117 and 21576 (1000 V, 80 °C) acc. to UL 758
cRU AWM I/II A/B (FT2) acc. to CSA C22.2 No.210-05
Design
Conductor
bare copper wire, ∅ ca. 0.51 mm (24 AWG)
Insulation
foam-skin polyolefin, core Ø ca. 0.95 mm
Core identification code
acc. to IEC 708-1
pair 1: white(-orange)/orange; pair 2: white(-green)/green
Stranding
cores twisted to pairs, pairs stranded together
Wrapping
1 layer plastic-foil
Screening
plastic laminated aluminum foil
on top:
braid of tinned copper wire, coverage ca. 85 %
Outer sheath
PUR halogen free compound, blue (similar to RAL 5021), outer Ø: ca. 5.8 mm
Electrical properties at 20° C
Resistance (loop)
max. 192 Ω/km
Insulation resistance
min. 5 GΩxkm
Mutual capacitance
nom. 48 nF/km
(at 800 Hz)
Characteristic impedance
100 Ω ±15 Ω
(1MHz up to 100 MHz)
Operating peak voltage
125 V (not for power purposes)
Velocity of propagation
ca. 0.77 c
Signal propagation time
nom. 433 ns/100m
Delay difference
<20 ns/100m
Test voltage (1 minute)
core/core: 1000 V
core/screening: 1000 V