Data Sheet

DATA SHEET
2170300
EtherLine



-P FLEX CAT. 5e 4 x 2 x 26 AWG
valid from :
17.06. 2005
elaborated by:
TE-K: N. Ensslen / M. Herb
Document: DB2170300_EN page 1 of 2
Nr.: 0019/0894
Application
EtherLine

-P FLEX CAT. 5e 4 x 2 x 26 AWG is a halogen free, flexible CATEGORY 5 high speed data
transmission cable suitable for application in the industrial environments to connect the (FAST-) ETHERNET
network with the field bus level. It enables a through going communication from sensor–actuator–level to Internet.
This data cable meets the requirements of Standards EIA/TIA-568 TSB-36 and ISO/IEC 11801 „Generic Cabling
for Customer Premises“ for CLASS D Links. The high quality double screening ensures a high security during
data transmission in areas with electromagnetic fields. The PUR outer sheath is resistant against mineral oils,
fats, against abrasion and against atmospheric UV radiation. The cable is designed for stationary applications in
dry and wet rooms and outside, as soon as freely moved without forced guidance and tensile stress.
Connectors: RJ 45 (IP 20) e. g.: Type CAT. 5, Stewart Connector Nr. 943-SP-370808 SM2
RJ 45 (IP 67) e. g.: Phoenix Contact, Harting, Woodhead
Design
Conductor stranded bare copper wire, 26 AWG; 0,14 mm
2
(7 x 0,16)
Insulation foam-skin, core diameter max.: 1,0 mm
Stranding cores twisted to pairs, pairs twisted to cable core
Colour code pair 1 white/blue - blue
pair 2 white/orange - orange
pair 3 white/green - green
pair 4 white/brown - brown
Screening aluminium laminated plastic foil
braid of tinned copper wires, coverage 85 % ± 5
Sheath PUR, halogen free, water blue RAL 5021
Outer diameter approx. 6,1 mm
Marking on the sheath:
LAPP KABEL EtherLine
®
-P FLEX CAT. 5 4 x 2 x 26AWG ROHS ART. 2170300
Electrical properties at 20°C
DC resistance (loop)
max.Ω/km
284
Insulation resistance
min. GΩxkm
5
Mutual capacitance at 800 Hz nom. nF/km 48
Impedance at 1.....100 MHz
Ω
100 ± 15