Data Sheet

DATA SHEET

2170465

ETHERLINE

P PiMF * *

4 x 2 x AWG22/1 CAT.6a

Valid from:

02.12.2008

prepared by:

PD-AN Hans Euler

Document: DB2170465EN

Page 1 of 2

Industrial Ethernet CAT. 6a

* * UL/CSA Approval in preparation

Application:

High speed cable for Industrial Ethernet for fixed installations in dry, wet or damp rooms. Cable

meets the transmission characteristics for Category 6a of IEC 61156-5 Ed. 2. These cables have

excellent resistance against mechanical stress, oils and greases and are halogenfree.

Design

Solid bare copper wire ø 0,64 (AWG22/1) ø 0.64 mm (0.025 in)

Insulation of foamed Polyethylene (PE) with skin ø 1.52 mm (0.059 in) nom.

ø 1.60 mm (0.063 in) max.

Core

2 cores individually screened with aluminium bonded plastic tape and stranded to form the

stranded element

Sequence of colours: pair 1: white / blue (WH/BU)-blue (BU),

pair 2: white / orange (WH/OG)-orange (OG)

pair 3: white / green (WH/GN)-green (GN),

pair 4: white / brown (WH/BN)-brown (BN)

Shield braiding of tinned copper wires 0.13 mm diameter (36 AWG)

Coverage approx. 85%

Non woven tape, longitudinally applied ø 6.7 mm (0.264 in)

Jacket

Special compound based on polyurethane (PUR) green (GN) flame retardant, halogen free

Wall thickness approx. 1.0 mm ø 8.7 ±0.3 mm

(0.343 ±0.012 in)

LAPP KABEL STUTTGART ETHERLINE

P PiMF CAT. 6a

4 x 2 x AWG22/1 SHIELDED ROHS ART. 2170465

PAGE 1
DATA SHEET 2170465 ETHERLINE® P PiMF * * 4 x 2 x AWG22/1 CAT.6a 02.12.2008 Valid from: Industrial Ethernet CAT. 6a * * UL/CSA Approval in preparation Application: High speed cable for Industrial Ethernet for fixed installations in dry, wet or damp rooms. Cable meets the transmission characteristics for Category 6a of IEC 61156-5 Ed. 2. These cables have excellent resistance against mechanical stress, oils and greases and are halogenfree.
PAGE 2
DATA SHEET 2170465 ETHERLINE® P PiMF * * 4 x 2 x AWG22/1 CAT.6a 02.12.2008 Electrical data at 20°C Loop resistance Signal run time Insulation resistance Capacitance at 800 Hz Velocity of propagation Characteristic impedance: 1 – 100 MHz 100 - 500 MHz Operating voltage (peak) Test voltage (wire/wire/screen rms 50Hz 1min) Valid from: ≤ 118,2 Ohm/km ≤ 4.7 ns/m ≥ 5 GOhm*km approx. 45 pF/m nom. 79% 100 (±15) Ohm 100 (± 22) Ohm ≤ 100V 700V Frequency (MHz) 4 10 16 20 31.25 62.