Data Sheet

U.I. Lapp
GmbH
DATA SHEET
ETHERLINE
®
HEAT Cat. 5e FL9YBC11Y
4x2x0,22sn
DB2170850
alid from
: 25.08.2015
Ersteller /
originator
: RAWE/PDC
freigegeben /
approved
: HAPF/PDC
Dokument /
document
: DB2170850
Seite/
page
3 von/
of
4
Wir behalten uns alle Rechte gemäß DIN ISO 16016 vor.
PD 0019/2.2_11.10DE
Application
ETHERLINE® HEAT CAT.5e FL9YBC11Y 4x2x0,22sn is a PUR sheathed CATEGORY 5e high speed data cable for industrial
usage acc. to ISO 6722. The cable is designed for fixed installation and limited moved applications in dry and damp areas. It
is heat resistant up to 105 °C and also suitable for outdoor applications. At room temperature the cable is widely resistant
against acids and bases as well as certain oils. Permanently moved applications with forcible control or usage on cable
drums and reels with more than 15 N/mm
2
tensile stress on the conductor cross-section is not allowed for this cable.
Naming acc. to ISO/IEC 11801: SF/UTP
Short mark naming acc. to DIN 76722: FL9YBC11Y 4x2x0,22sn
Tested acc. to LV 112-1, LV-212-2, LV 213-2 and certified acc. to ECE-R 118.
Design
sketch
conductor
tinned copper, 7-wire (AWG24/7), ca. 0.61 mm Ø
insulation
polyolefin, heat resistant, nom. 1.17 mm outer Ø
core identification
pair 1: white/blue + blue; pair 2: white/orange + orange;
pair 3: white/green + green; pair 4: white/brown + brown
stranding
2 cores stranded to pair, pairs stranded to bundle
wrapping
non-woven tape (overlapping)
screening
plastic laminated aluminum foil (side with metal outwards, overlapping)
on top:
braid of copper wire, tinned wire, coverage ca. 85 %
wrapping
thin non-woven tape, longitudinally applied
(used for improved stripping characteristics )
outer sheath
PUR based compound, yellow-green similar to RAL 6018,
wall thickness ca. 1 mm, outer Ø ca. 7.7 mm
weight
ca. 0.072 kg/m
Electrical properties at 20° C
resistance (loop)
max. 173 Ω/km
insulation resistance
min. 5 GΩ xkm
mutual capacitance
nom. 48 nF/km (at 800 Hz)
characteristic impedance
nom. 100 Ω acc. to IEC 61156-6
operating peak voltage
125 V (not for power purposes)
test voltage (rms 50 Hz, 1 minute)
core/core: 1000 V
core/screening: 500 V

Summary of content (2 pages)