Data Sheet

U.I. Lapp

GmbH

DATASHEET

ÖLFLEX® CONTROL TM CY

281405CY

14.11.2013

PN 0486/01_03.10

Wide application range due to multiple approvals

Cost-saving, easy installation due to omission of closed raceways (suitable for open wiring)

Flame-retardant

Cold-resistant

Mechanical resistance

Oil-resistant

Interference signals

Torsion-resistant

Info

Torsion resistant for drip loops

Wide application range (NFPA 70/NEC)/ compliance with NFPA 79 for industrial machinery

EMC/Screened

Application range

Industrial machinery; plant engineering

Machine tools compliant with UL MTW (Machine Tool Wiring)

TC-ER (Tray Cable Exposed Run) approval for open wiring between cable tray and industrial machines/plants acc. to NEC

336.10(7)

Wind turbines: USA Wind Turbine Tray Cable (WTTC)

Class 1, Div. 2 in accordance with NEC "National Electrical Code" Art. 336, 392, 501

Design

Fine-wire strand made of bare copper wires

Insulation: PVC with nylon sheath (PA skin)

Aluminum-coated foil

Tinned-copper braiding

Outer sheath made of special PVC compound, grey

Product Management Document: ÖLFLEX® CONTROL TM CY

1 / 2

Photographs are not to scale and do not represent detailed images of the respective products.

PAGE 1
DATASHEET U.I. Lapp GmbH ÖLFLEX® CONTROL TM CY 281405CY 14.11.
PAGE 2
Powered by TCPDF (www.tcpdf.org) DATASHEET U.I. Lapp GmbH ÖLFLEX® CONTROL TM CY 281405CY 14.11.2013 Norm references / Approvals Multi-standard cables have conductor strands with nominal sizes in mm² or AWG/kcmil. The master size is mentioned in the table below, while the equivalent size of the other system can be found in the Appendix T16 of this catalogue. For this related secondary size the cross-section of the conductor mostly works out to be greater than thespecified nominal value.