Data Sheet

ManualsBrandsLAPP ManualsCables & WiresLAPP ÖLFLEX® CONTROL TM CY Control lead 5 G 2.50 mm² Grey 281405CY 76 m

U.I. Lapp

GmbH

DATASHEET

ÖLFLEX® CONTROL TM CY

281405CY

14.11.2013

PN 0486/01_03.10

Norm references / Approvals

Multi-standard cables have conductor strands with nominal sizes in mm² or AWG/kcmil. The master size is mentioned in the

table below, while the equivalent size of the other system can be found in the Appendix T16 of this catalogue. For this related

secondary size the cross-section of the conductor mostly works out to be greater than thespecified nominal value.

Cable type certifications UL MTW, TC-ER, WTTC 1000 V, BUS DROP, c(UL) Type TC, CIC FT4, CSA AWM I/II A/B FT4, UL

AWM style 20886

Product features

Flame-retardant according to CSA FT4 UL Vertical-Tray Flame Test

Oil-resistant according to UL OIL RES I & II

Water-resistant, UL Wet Approval 75 °C

High degree of screeninglow transfer impedance (max. 250 Ω/km at 30 MHz)

Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)

Remark

Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon

request.

Copper price basis: EUR 150/100kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related

surcharges.

Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths

Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum

Please specify the preferred type of packaging (e.g. 1 x 610 m drum or 8 x 76 m coils).

Photographs are not to scale and do not represent detailed images of the respective products.

*OD = Outer diameter

Technical Data

Number of cores and mm² per conductor: 5 G 2,5

Outer diameter (mm): 11,5

Copper index (kg/km): 160.3

Weight (kg/km): 268

Core identification code: Black with white numbers

Classification: ETIM 5.0 Class-ID: EC000104

ETIM 5.0 Class-Description: Control cable

Conductor stranding: Fine-wire, bare copper strand

Torsion movement in WTG: TW-0 & TW-2, refer to Appendix T0

Minimum bending radius: Static/Occ. moved: 5/20xOD*

Nominal voltage: UL/CSA: 600 V (TC, MTW, CIC), WTTC 1000 V

UL/CSA: 1000 V (AWM)

VDE U0 /U: 600/1000 V

Test voltage: 2000 V

Protective conductor: G = with GN-YE protective conductor

X = without protective conductor

Temperature range: -40°C (static)/ -25°C (occ. moved) to +90°C (AWM: +105°C)

Product Management Document: ÖLFLEX® CONTROL TM CY

2 / 2

Photographs are not to scale and do not represent detailed images of the respective products.