Data Sheet

U.I. Lapp
GmbH
DATASHEET
ÖLFLEX® CONTROL TM
281803
14.11.2013
PN 0486/01_03.10
Wide application range due to multiple approvals
Cost-saving, easy installation due to omission of closed raceways (suitable for open wiring)
Flame-retardant
Cold-resistant
Mechanical resistance
Oil-resistant
Torsion-resistant
Info
Torsion resistant for drip loops
Wide application range (NFPA 70/NEC)/ compliance with NFPA 79 for industrial machinery
Application range
Industrial machinery; plant engineering
Machine tools compliant with UL MTW (Machine Tool Wiring)
TC-ER (Tray Cable Exposed Run) approval for open wiring between cable tray and industrial machines/plants acc. to NEC
336.10(7)
Wind turbines: USA Wind Turbine Tray Cable (WTTC)
Class 1, Div. 2 in accordance with NEC "National Electrical Code" Art. 336, 392, 501
Design
Fine-wire strand made of bare copper wires
Insulation: PVC with nylon sheath (PA skin)
Outer sheath made of special PVC compound, grey
Norm references / Approvals
Multi-standard cables have conductor strands with nominal sizes in mm² or AWG/kcmil. The master size is mentioned in the
table below, while the equivalent size of the other system can be found in the Appendix T16 of this catalogue. For this related
secondary size the cross-section of the conductor mostly works out to be greater than thespecified nominal value.
Cable type certifications UL MTW, TC-ER, WTTC 1000 V, BUS DROP, c(UL) Type TC, CIC FT4, CSA AWM I/II A/B FT4, UL
AWM style 20886
Product Management Document: ÖLFLEX® CONTROL TM
1 / 2
©2012 Lapp Group - Technical changes reserved
Photographs are not to scale and do not represent detailed images of the respective products.