Datasheet

U.I. Lapp
GmbH
DATA SHEET
LiY single core
DB4125000
valid from: 23.02.2018
Originator: PESA / PDC
approved: HAPF / PDC
Document: DB4125000EN
page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
LiY single core is a stranded hook-up wire for telecommunication devices and electronic components.
These cables are suited for occasional flexing use and fixed installation in dry and wet rooms.
Design
Design
Design and characteristics are similar to VDE 0812.
Conductor
bare copper wires, conductor make-up:
0.14 mm²: ca. 18 x 0,10 mm
0.25 mm²: ca. 14 x 0,15 mm
Insulation
PVC
Core identification code
one or two colours
(two colours: with twin colour helix)
dlsafjlöj f
Electrical properties
Conductor resistance
0.14 mm²: max. 142 Ω/km
0.25 mm²: max. 77.5 Ω/km
Insulation resistance
> 200 MΩ x km
Peak operating voltage
0.14 mm²: 500 V (not for power applications)
0.25 mm²: 900 V (not for power applications)
Test voltage
0.14 mm²: 1200 V
0.25 mm²: 2500 V
Mechanical and thermal properties
Temperature range
Flexing: - 5˚C up to +70˚C
Fixed installation: - 30˚C up to +70˚C
Flammability
flame retardant acc. to IEC 60332-1-2
General requirements
This cable is conform to the EU-Directive 2011/65/EU
(RoHS, Restriction of the use of certain hazardous substances).