Datasheet

ManualsBrandsLapp ManualsCable & WireStranded Wire PVC 0.75mm² Bare Copper Blue H05V-K 100m

U.I. Lapp

GmbH

DATA SHEET

H05V-K

DB8110001EN

valid from: 11

Sept. 2014

Originator: T. Merker / PCM

approved: ? / PDC

Document: DB8110001EN

page 1 of 1

PD 0019/2.2_11.10EN

APPLICATION (HD 516)

H05V-K belongs to Europe’s harmonized, normative cable types and is designed according to the CENELEC harmonized third-party stand-

ard EN 50525-2-31 – formerly: Meanwhile withdrawn harmonization document HD 21.3. H05V-K is a classic, single-layer insulated, single-

core, low-voltage hook-up wire, and that for stationary/ static and protected installation inside of devices/ appliances/ machines/ con-

trol cabinets (panels) etc. as well as inside or on lamps, since it only disposes of basic protection, but not additional error protection, in

line with modified IEC 60364-4-41/ HD 60364-4-41, for lack of an outer sheath/ jacket. Also, H05V-K is suitable for protected, station-

ary/ static installation inside of closed conduits and cable ducting systems. Unprotected laying on or under plaster as well as wiring

through unclosed or opening cable trunking systems shall only be permitted as part of security irrelevant signal and control circuits with

special extra-low voltage under 25 V AC to-ground or under 60 V DC to-ground. In wet or damp rooms and locations, unprotected laying is

completely forbidden. Under individual part numbers, different core insulation colours are offered for diverse application types. As packag-

ing type, 100-metre coils in small, flat cardboard boxes are applied.

ETIM 5.0 Class-ID: EC000993

ETIM 5.0 Class-Description: Single core cable

DESIGN (EN 50525-2-31)

Conductor Copper, bare, fine-wired/ finely stranded, conductor class 5 acc. IEC 60228

Nominal conductor cross section 0.5 mm² to and incl. 1 mm²

Core insulation PVC compound type TI 1 acc. EN 50363-3

Core insulation colours Diverse single colours

Diverse double colours (lengthways stripes)

CABLE TYPE CERTIFICATION (EN 50525-2-31)

◄VDE► H05V-K

Exceptions without cable type certification:

 Transparent core insulations

 Core insulations with partly transparent multiple-colour combinations

ELECTRICAL PROPERTIES @ +20 °C

IEC rated voltage U

/U 300/500 V AC = 450/750 V DC

Conductor resistance IEC 60228, conductor class 5

Test voltage 2000 V AC

Compliance with low-voltage EC directive 2006/95/EC

MECHANICAL, THERMAL AND CHEMICAL PROPERTIES

Minimum bending radius (HD 516) Intended use: 4 x Outer diameter

Cautious bending: 2 x Outer diameter

Conductor temperature Stationary/ static operation (without vibration): -40 °C to +80 °C

Moved operation (not normatively intended): +5 °C to +70 °C

Laying/ handling: Min. +5 °C

Short-circuit and ground leakage: Max. +160 °C

Ambient temperature at storage: Max. +40 °C

Flame retardant IEC 60332-1-2

RoHS Chemical compliance with the EU RoHS II directive 2011/65/EU on the

Restriction of (the use of certain) Hazardous Substances