Brochure

U.I. Lapp
GmbH
PRODUCT INFORMATION
H05V-K <HAR>
05.11.2015
PN 0486/01_03.10
European <HAR> cable type certification
Cables' <HAR>marking also stands for the international endorsement of national certification institutes' testing marks and
certificates, e. g. <VDE><HAR>. The <HAR>marking is of special importance in case of goods traffic between European
countries.
Info
<HAR>
Application range
Internal wiring of devices
Protected installation in and on lighting equipments
Signal systems in and on plaster in tubes
Product Make-up
Fine-wired copper conductor of bare copper strands in line with conductor class 5 acc. IEC 60228
Core insulation: Based on PVC
Norm references / Approvals
<HAR> cable type certification acc. EN 50525-2-31
Product features
Flame-retardant according IEC 60332-1-2
Spool: d1 = 18 mm; d2 = 200 mm; b = 85 mm
Remark
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon
request.
Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related
surcharges.
Photographs are not to scale and do not represent detailed images of the respective products.
The outer diameters stated in the part number table are maximum values.
Technical Data
Classification: ETIM 5.0 Class-ID: EC000993
ETIM 5.0 Class-Description: Single core cable
Conductor stranding: Fine wire according to VDE 0295 Class 5/ IEC 60228 Class 5
Minimum bending radius: According to EN 50565-1
4 x outer diameter (OD) for normal use
2 x OD for cautions bending
Nominal voltage: U₀/U: 300/500 V
Test voltage: 2000 V
Current rating: VDE 0298 Part 4
EN 50565-1/ VDE 0298-565-1
Temperature range: Fixed installation: -40°C to +80°C
Moved: +5°C to +70°C
Product Management Document: LAPP_PRO168EN.pdf
1 / 5
©2012 Lapp Group - Technical changes reserved
Photographs are not to scale and do not represent detailed images of the respective products.

Summary of content (5 pages)