Data Sheet

U.I. Lapp

GmbH

DATASHEET

SKINTOP® MS-M

53112512

14.11.2013

PN 0486/01_03.10

Maximum reliability

Optimum strain relief

Wide, variable clamping ranges

For cable diameters up to 98 mm

Good chemical resistance

Corrosion-resistant

Mechanical resistance

Optimum strain relief

Acid-resistant

Temperature-resistant

Variety of approval certifications

Info

SKINTOP® MS-M sizes 75 x 1.5 to 110 x 2 with innovative double lamella gasket for easier assembling of cables with large

diameters.

Now with IP 69 K approval! Proven to withstand the most demanding cleaning procedures for industrial machinery with high-

pressure cleaners and hot water!

Application range

In areas where mechanical and chemical stability are critical

Chemical industry

Measurement and control technology

Machine and equipment manufacturing

Plant engineering

Design

Metric connection thread acc. to EN 50262

Norm references / Approvals

UL File Nr. E79903

Note

Counter nut to be used: SKINDICHT® SM-M

Refer to SKINTOP® metric accessories for suitable accessories

Product Management Document: SKINTOP® MS-M

1 / 3

Photographs are not to scale and do not represent detailed images of the respective products.

PAGE 1
U.I. Lapp GmbH DATASHEET SKINTOP® MS-M 53112512 14.11.2013 Maximum reliability Optimum strain relief Wide, variable clamping ranges For cable diameters up to 98 mm Good chemical resistance Corrosion-resistant Mechanical resistance Optimum strain relief Acid-resistant Temperature-resistant Variety of approval certifications Info SKINTOP® MS-M sizes 75 x 1.5 to 110 x 2 with innovative double lamella gasket for easier assembling of cables with large diameters.
PAGE 2
U.I. Lapp GmbH DATASHEET SKINTOP® MS-M 53112512 14.11.2013 Remark Photographs are not to scale and do not represent detailed images of the respective products. Technical Data Article designation / size: 90 x 2 Clamping range ØF (mm): 66-78 SW (mm): 115 Overall length, C (mm): 136 Thread length, D (mm): 20 Pieces / PU: 1 Caution: Refer to Appendix T21 for the installation dimensions and torques Approvals: IP 69 K approval from size M75 x 1.5 pending.
PAGE 3
Powered by TCPDF (www.tcpdf.org) U.I. Lapp GmbH DATASHEET SKINTOP® MS-M Product Management Document: SKINTOP® MS-M ©2012 Lapp Group - Technical changes reserved PN 0486/01_03.10 Photographs are not to scale and do not represent detailed images of the respective products. 53112512 14.11.