Manualshelf

Data Sheet

ManualsBrandsLAPP ManualsBlade Receptacles & Piggyback ConnectorsLAPP 63101020 Blade receptacle Connector width: 2.8 mm Connector thickness: 0.5 mm 180 ° Partially insulated Red 100 pc
1
DATA SHEET
63101020
Receptacles rolled type 0,1 - 6 mm²
valid from :
18.12.2003
elaborated by:
PD: Mayer-Vorfelder
Document: DB63101020_1EN page1 of 1
Nr.: 0019/0894
Technical data:
- Brass
- Tin plates
- Brazed barrel
- polycarbonate insulation
- easy-entry
- not for solid conductors
For more safety on site all insulated connectors have an imprint that indicates the cross
section of the respective connector.
The crimping dies of the recommended tool emboss the cross section of the used die onto
the connector insulation.
Easy-entry:
The insulation has an easy-entry device, which assures correct insertion of the conductor
into the cable socket.

Summary of content (1 pages)