Datasheet

ManualsBrandsLAPP ManualsCables & LeadsLAPP 70002640 Spiral cable ÖLFLEX® SPIRAL 400 P 500 mm / 1500 mm 5 x 0.75 mm² Grey 1 pc(s)

U.I. Lapp

GmbH

DAT

A SHEET

ÖLFLEX

SPIRAL 400 P

DB 70002622EN

valid from: 2013-09-20

Originator: KASC / PDC

approved: HAPF / PDC

Document: DB70002622EN Page 1 of 1

PD 0019/2.2_11.10EN

Application

ÖLFLEX



SPIRAL 400 P cables are oil resistant cables with Polyurethane outer sheath, for flexible use and fixed installation

for medium mechanical abuse. They are for use in dry, damp or wet conditions. With consideration to the specified tempera-

ture range it is possible to use it outside. ÖLFLEX



SPIRAL 400 P cables are increased oil resistant and at room temperature

generally resistant against acids and caustics solution. The outer sheath is resistant against high mechanical use, particular-

ly to abrasion cuts, microbe proof and hydrolysis resistant.

ÖLFLEX



SPIRAL 400 P cables are designed for use under rough working conditions and to high wear and tear. The strength

of recoiling and the extension lengths up to 3 times of the original length are features of the high quality.

Application range: as control and power cables in machines, mechanical engineering and apparatus construction

Dimensions

L Unextended spiral length

L1 Max. extended length of spiral

D1 Approx. outer diameter of spiral

D2 Approx. outer diameter of spiral

Length of extended ends:

First end: 200 mm

Second end: 600 mm

Design

Design based on

EN 50525-2-51 resp. VDE 0285-525-2-51 / HD 21.13 S1 resp. VDE 0281-13

EN 50525-2-21 resp. VDE 0285-525-2-21 / HD 22.10 S2 resp. VDE 0282-10

Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5

Core insulation Lapp special PVC compound P8/1, better than PVC compound TI2, acc. to

EN 50363-3 resp. VDE 0207-363-3

Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor

black cores with white numbers acc. to DIN EN 50363-3 resp. VDE 0207-363-3

Outer sheath Polyurethan compound TMPU acc. to EN 50363-10-2 resp. VDE 0207-363-10-2

colour: silver grey, similar RAL 7001

Electrical properties

Nominal voltage U

/ U: 300 / 500 V

Test voltage Core / Core: 4000 V AC

Mechanical and thermal properties

Temperature range occasional flexing: +5 °C up to +50 °C max. conductor temp.

Oil resistance acc. to EN 50363-10-2 resp. VDE 0207-363-10-2

Tests acc. to IEC 60811, EN 50395, EN 50396

EC-Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive)

and 2011/65/EG (RoHS, Restriction of the use of certain hazardous substances).

200

600