Data Sheet

U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
TRUCK 170 FLRYY
DB 7027060
valid from: 12.04.2010
Originator: R. Krämer / PDC
approved: H. Pfeffer / PDC
Document: DB7027060EN page 1 of 2
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
Application
ÖLFLEX
®
TRUCK 170 FLRYY are cold flexible, UV resistant PVC hose cables designed for use in commercial vehicles under
medium mechanical load conditions. Because of ADR approval they are approved for electrical equipment in all trailers and
semi-trailers transporting hazardous goods. The type test approval TÜ.EGG.092-04 was awarded by the TÜV SÜD Automo-
tive GmbH (Abbrev. for: Electrical equipment for vehicles transporting hazardous goods).
Design
Design acc. to DIN ISO 6722
Approval TÜ.EGG.092-04 (ADR approval)
Conductor fine wire strands of bare copper, acc. to DIN ISO 6722
Core insulation PVC compound
Data transmission cores pairs for data transmission: Stranded cores, polypropylene (PP) insulating cover
Core identification acc. to DIN ISO 4141-3
Outer sheath PVC compound
colour: Black
Electrical properties at 20 °C
Specific insulation resistance G Ω x cm > 20
Nominal voltage 60 V DC
Test voltage < 0,5 mm²: 3000 V r.m.s. min. 5 minutes
≥ 0,5 mm²: 5000 V r.m.s. min. 5 minutes
Capacity of data pairs rated to length between cores: max. 50 pF/m
and between each data transmission cores
and all other cores in the cable: max. 100 pF/m
Mechanical and thermal properties
Min. bending radius 12 x cable diameter
Temperature range fixed installation: -40 °C up to +85 °C max. conductor temperature
Cable Class A acc. to DIN ISO 6722 clause 1
Flammability flame retardant in acc. with DIN ISO 6722 clause 12
Tests acc. to DIN ISO 6722 clause 1 up to 4 (table 3)
acc. to DIN ISO 4141 part 1, 2 and 4
Outer diameter s. table 1

Summary of content (2 pages)