Data Sheet

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

TRUCK 470 P FLRYY 11Y

DB 7027080

valid from: 22.04.2010

Originator: R. Krämer / PDC

approved: H. Pfeffer / PDC

Document: DB7027080EN page 1 of 2

PD 0019/2.1_11.09EN

Application

ÖLFLEX

TRUCK 470 P FLRYY 11Y are cold flexible, UV resistant PUR hose cables designed for use in commercial vehicles

under high mechanical load conditions. Because of ADR approval they are approved for electrical equipment in all trailers

and semi-trailers transporting hazardous goods. The type test approval TÜ.EGG.003-94 was awarded by the TÜV SÜD Auto-

motive GmbH (Abbrev. for: Electrical equipment for vehicles transporting hazardous goods).

Design

Design acc. to DIN ISO 6722

Approval TÜ.EGG.003-94 (ADR approval)

Conductor fine wire strands of bare copper, acc. to DIN ISO 6722

Core insulation PVC compound

Data transmission cores pairs for data transmission: Stranded cores, polypropylene (PP) insulating cover

Core identification acc. to DIN ISO 4141-3

Outer sheath Special PVC based inner sheath

Special polyurethane outer sheath

colour: Black

Electrical properties at 20 °C

Specific insulation resistance G Ω x cm > 20

Nominal voltage 60 V DC

Test voltage < 0,5 mm²: 3000 V r.m.s. min. 5 minutes

≥ 0,5 mm²: 5000 V r.m.s. min. 5 minutes

Capacity of data pairs rated to length between cores: max. 50 pF/m

and between each data transmission cores

and all other cores in the cable: max. 100 pF/m

Mechanical and thermal properties

Min. bending radius 12 x cable diameter

Temperature range fixed installation: -40 °C up to +85 °C max. conductor temperature

Cable Class A acc. to DIN ISO 6722 clause 1

Flammability flame retardant in acc. with DIN ISO 6722 clause 12

Tests acc. to DIN ISO 6722 clause 1 up to 4 (table 3)

acc. to DIN ISO 4141 part 1, 2 and 4

Outer diameter s. table 1

PAGE 1
U.I. Lapp GmbH DATA SHEET ÖLFLEX® TRUCK 470 P FLRYY 11Y DB 7027080 valid from: 22.04.2010 Application ® ÖLFLEX TRUCK 470 P FLRYY 11Y are cold flexible, UV resistant PUR hose cables designed for use in commercial vehicles under high mechanical load conditions. Because of ADR approval they are approved for electrical equipment in all trailers and semi-trailers transporting hazardous goods. The type test approval TÜ.EGG.003-94 was awarded by the TÜV SÜD Automotive GmbH (Abbrev.
PAGE 2
U.I. Lapp GmbH DATA SHEET ÖLFLEX® TRUCK 470 P FLRYY 11Y DB 7027080 valid from: 22.04.2010 Table 1 Number of cores & cross section [mm²] Colour code ref. to cross section Acc. to ISO connector standard Outer diameter ca. [mm] Part No. 2 x 1.0 2 x 1.0 3 x 1.0 3 x 1.0 4 x 1.0 5 x 1.0 5 x 1.0 + 1 x 2.5 5 x 1.0 + 1 x 2.5 5 x 1.0 + 1 x 2.5 WH/BK WH/BN WH/BN/BU latest ISO version BK/BN/BU WH/BK/RD/BN WH/BN/GN/RD/GY (1.0mm²) BN/GN/RD/GY/VT (2.5mm²) WH (1.0mm²) GN/BN/RD/BU/VT (2.5mm²) WH (1.