Data Sheet

U.I. Lapp
GmbH
DATA SHEET
Perforation cutter
DB 83259603EN
valid from: 01.04.2010
Originator: C. Lutz / PPM
approved: R. Drotleff / PDP
Document: DB83259603EN page 1 of 1
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/2.1_11.09EN
General description
The perforation cutter also permits the perforation of the
material in order to separate it manually. The tool is com-
patible to the FLEXIMARK® Transfer printer A4+M/300 and
is adjustable by the operation of the printer. This ensures
the cutting or perforation at the right place.
Product features
The cutter is used to cut and perforate labels and heat
shrinkable tubing with the materials paper, cardboard,
textile, Synthetics like PET, PE, PP, PVC, PU, Acrylat and PI.
Technical data
Material width: Up to 110 mm
Material height: 60 – 300 gr/m2/cardboard
Material thickness: 0,05 - 1,2 mm
Cutting length: < 5 mm
Gap height: Up to 4,5 mm
Stop print job if: Final position not reached
Cutting: 120 cuts/min
Perforating: 150 perforations/min
Web width: 0,5 mm
Web distances: 2,5 or 10 mm
Additional accessories
• FLEXIMARK® Thermoprint A4+M/300
• FLEXIPRINT TF single core marking
• FLEXILABEL TFL cable marking
• TA labels for cable marking
• TCK labels for cable marking
• FLEXIMARK
®
heat shrinkable tubing
• Ribbons R71
• External rewinder