Datasheet

U.I. Lapp
GmbH
PRODUCT INFORMATION
ÖLFLEX® CLASSIC 110 CY
12.09.2012
PN 0486/01_03.10
Space-saving installation due to small cable diameters
High electrical performance due to 4 kV test voltage
Info
EMC-compliant
VDE reg. no. 7030
Application range
Plant engineering Industrial machinery Heating and air-conditioning systems
Conveyor and transport systems
In EMC-sensitive environments (electromagnetic compatibility)
Design
Fine-wire strand made of bare copper wires
PVC insulation LAPP P8/1
PVC inner sheath, grey
Tinned-copper braiding
PVC outer sheath, transparent
Product features
Flame-retardant according to IEC 60332-1-2
Good chemical resistance see Appendix T1
High degree of screening low transfer impedance (max. 250 Ω/km at 30 MHz)
Remark
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon
request.
Copper price basis: EUR 150/100kg. Refer to Appendix T17 for the definition and calculation of copper-related surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
Photographs are not to scale and do not represent detailed images of the respective products.
Product Management Document: LAPP_PRO10EN.pdf
1 / 5
©2012 Lapp Group - Technical changes reserved
Photographs are not to scale and do not represent detailed images of the respective products.