Datasheet

U.I. Lapp

GmbH

PRODUCT INFORMATION

ÖLFLEX® FD CLASSIC 810

12.09.2012

PN 0486/01_03.10

PVC-insulated, numbered, PVC sheath

Well-proven, reliable

Cost-effective solution

Info

Bestseller among the FD power chain cables

Well-proven, reliable

Application range

In power chains or moving machine parts

Suitable for use in measuring, control and regulating circuits

Power circuits for electrical equipments used in automation engineering

Assembly lines, production lines, in all kinds of machines

Plant engineering

Design

Extra-fine wire strand made of bare copper wires (class 6)

Core insulation: PVC

Cores twisted in layers in short lay lengths

Non-woven wrapping

PVC outer sheath, grey (RAL 7001)

Approvals (Norm references)

For travel distances up to 10 m.

For use in power chains: Please comply with the assembly guidelines listed in Appendix T3

Product features

Low-adhesive surface

Flame-retardant according to IEC 60332-1-2

In damp or wet interiors

Designed for 2 up to 8 million bending/unbending cycles in the power chain. Further informations regarding service life see table

T0 of the appendix of the Lapp catalogue.

Only for outdoor use within the indicated operating temperature range, with UV-protection

Remark

Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon

request.

Copper price basis: EUR 150/100kg. Refer to Appendix T17 for the definition and calculation of copper-related surcharges.

Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths

Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum

Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).

Photographs are not to scale and do not represent detailed images of the respective products.

Product Management Document: LAPP_PRO88EN.pdf

1 / 4

Photographs are not to scale and do not represent detailed images of the respective products.

PAGE 1
U.I. Lapp GmbH PRODUCT INFORMATION ÖLFLEX® FD CLASSIC 810 12.09.
PAGE 2
U.I. Lapp GmbH PRODUCT INFORMATION ÖLFLEX® FD CLASSIC 810 Technical Data 12.09.2012 Core identification code: Black with white numbers acc. to VDE 0293 Based on: Core in accordance with VDE 0245/0281 Outer sheath in accordance with VDE 0245/0281 Specific insulation resistance: > 20 GOhm x cm Conductor stranding: Extra-fine wire according to VDE 0295, class 6/IEC 60228 class 6 Minimum bending radius: For flexible use: 7.
PAGE 3
Powered by TCPDF (www.tcpdf.org) Weight (kg/km) 0026100 2 X 0,5 5.3 10.0 40 0026101 3 G 0,5 5.7 15.0 48 0026102 4 G 0,5 6.3 19.2 58 0026103 5 G 0,5 6.8 24.0 67 0026104 7 G 0,5 8.0 34.0 88 0026105 12 G 0,5 9.5 58.0 136 0026106 18 G 0,5 11.4 86.4 195 0026107 25 G 0,5 13.7 120.0 274 0026108 30 G 0,5 14.3 144.0 312 0026109 34 G 0,5 15.6 164.0 359 0026110 50 G 0,5 18.5 240.0 515 0026119 2 X 0,75 5.7 15.0 49 0026120 3 G 0,75 6.2 22.
PAGE 4
Powered by TCPDF (www.tcpdf.org) Weight (kg/km) 0026144 65 G 1,0 25.4 624.0 1097 0026149 2 X 1,5 6.8 29.0 74 0026150 3 G 1,5 7.4 43.2 93 0026151 4 G 1,5 8.1 58.0 114 0026152 5 G 1,5 9.1 72.0 139 0026153 7 G 1,5 10.9 101.0 189 0026154 12 G 1,5 12.9 173.0 295 0026156 18 G 1,5 15.6 259.0 429 0026157 25 G 1,5 18.6 360.0 597 0026158 26 G 1,5 18.6 374.4 615 0026159 34 G 1,5 21.1 489.6 783 0026160 41 G 1,5 23.0 613.0 936 0026161 42 G 1,5 23.0 629.