Datasheet

U.I. Lapp
GmbH
PRODUCT INFORMATION
ÖLFLEX® FD 855 P
12.09.2012
PN 0486/01_03.10
TPE-insulated, numbered, PUR sheath
Well-proven, reliable
Various applications
Suitable for all weather conditions
Info
MUD res. according to IEC61892-4 Annex D
Flexible down to -40°C
Smallest bending radii of all FD cables
Application range
In power chains or moving machine parts
Particularly in wet areas of machine tools and transfer lines
Mechanical engineering
Construction machinery
Assembly lines, production lines, in all kinds of machines
Design
Extra-fine wire strand made of bare copper wires (class 6)
Core insulation: TPE
Cores twisted together in extremely short lay lengths
Non-woven wrapping
PUR outer sheath, grey (RAL 7001) or green (RAL 6018)
Approvals (Norm references)
For travel distances up to 100 m (horizontal)
For use in power chains: Please comply with the assembly guidelines listed in Appendix T3
Product features
Low-adhesive surface
Oil-resistant
Halogen-free and flame-retardant (IEC 60332-1-2)
In dry, damp or wet interiors with normal mechanical stress conditions
Designed for 2 up to 8 million bending/unbending cycles in the power chain. Further informations regarding service life see table
T0 of the appendix of the Lapp catalogue.
Remark
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon
request.
Copper price basis: EUR 150/100kg. Refer to Appendix T17 for the definition and calculation of copper-related surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: coil ≤ 30 kg or ≤ 250 m, otherwise drum
Please specify the preferred type of packaging (e.g. 1 x 500 m drum or 5 x 100 m coils).
Photographs are not to scale and do not represent detailed images of the respective products.
Product Management Document: LAPP_PRO94EN.pdf
1 / 4
©2012 Lapp Group - Technical changes reserved
Photographs are not to scale and do not represent detailed images of the respective products.