Datasheet

DATA SHEET
0011000
ÖLFLEX
®
140
valid from :
23.04.2007
elaborated by:
TE-K: H. Schillinger / M. Herb
Document: DB0011000EN page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX
®
140 cables are oil-resistant control cables for flexible use and fixed installation for connecting from
production- and machine tools components together. They are for use in dry, damp and wet rooms. They may
only be installed outdoors with UV-protection and in observation of the temperature range. ÖLFLEX
®
140 cables
are increased oil resistant and at room temperature generally resistant against acids and caustics solutions.
Continuous, busy movements, usage of these cables in moving cable carriers, respectively on motor drum
guidance or under a strain of more than 15 Nmm² is not allowed.
Technical data
Design H05VV5-F in acc. to HD 21.13 S1 that is VDE 0281-13
Conductor bare copper, fine wire strand in accordance to IEC 60228
that is VDE 0295, class 5
Core insulation PVC-compound TI2 in accordance to HD 21.1 S4 that is VDE 0281-1
Identification black cores with white numbers with green/yellow ground conductor in accordance
to VDE 0293-1 and EN 50334 that is VDE 0293-334
Outer sheath PVC-compound TM5 in accordance to HD 21.1 S4 that is VDE 0281-1
Nominal voltage 300/500 V
Test voltage 3000 V AC
Temp. range for flexible use: -5 up to +70° C max. conductor temperature
fixed installation: -40 up to +70° C max. conductor temperature
Min. bending radius for flexible use: 12,5 x cable diameter
fixed installation: 4 x cable diameter
Flame retardant in acc. to IEC 60332-1-2 that is VDE 0482-332-1-2
Oil resistance in acc. to IEC 60811-2-1 that is VDE 0473-811-2-1
Approvals H05VV5-F in acc. to HD 21.13 S1 that is VDE 0281-13
Tests in acc. to IEC 60811-x-x that is VDE 0473 part 811-x-x and VDE 0472
EC directive This cable confirms to ECD 2006/95/EEC (low voltage directive).