Datasheet

ManualsBrandsLAPPKABEL ManualsIndustrial Data CablesControl wiring ÖLFLEX® 150 5 G 1 mm² Grey 150 m

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

150

DB 0015003

valid from: 2014-03-11

Originator: KASC / PDC

approved: HAPF / PDC

Document: DB0015003EN

Page 1 of 2

PD 0019/2.2_11.10EN

Application

ÖLFLEX

150 cables are oil resistant power and control cables for the European, North American and Canadian market, for

occasional flexible use and fixed installation to normal mechanical load conditions. They are among others designed for use

in dry, damp and wet rooms. Outdoor use: They may only be installed with UV protection and considering the temperature

range. ÖLFLEX

150 cables are increased oil resistant and at room temperature widely resistant against acid and caustic

solutions. They are suitable for non-continuously recurring movement without tensile load. Continuous operational move-

ments, restricted guidance, usage of these cables in moving cable carriers or on motor drum guidance or under a strain of

more than 15 N/mm² are not allowed.

Application range:

plant engineering, industrial machinery, heating and air conditioning systems

HAR: DIN VDE 0298-300 resp. VDE 0298-300

acc. to UL: PVC-sheathed cables for external interconnection or internal wiring of electric and electronic equipment,

use when getting in contact with oil not above +60 °C (60 °C oil rating)

acc. CSA: CSA AWM I A/B II A/B, cables for internal or external interconnection with or without mechanical load

Design

Design ≤ 61 cores: acc. to EN 50525-2-51 resp. VDE 0285-525-2-51

> 61 cores: based on EN 50525-2-51resp. VDE 0285-525-2-51

UL AWM Style 21098 or 2587, CSA C22.2 No. 210-11

Approvals UL AWM Style 21098 or 2587 (File No. E63634)

CSA AWM I A/B II A/B (File No. LL 53776)

up to 61 cores:

acc. to H05VV5-F acc. to EN 50525-2-51 resp. VDE 0285-525-2-51

> 61 cores:

based on EN 50525-2-51resp. VDE 0285-525-2-51

Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5

Core insulation PVC compound TI2 acc. to DIN EN 50363-3 resp. VDE 0207-363-3

(UL/CSA 90°C rating)

Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor

black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334

Outer sheath PVC compound TM5 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1

(UL/CSA 90°C rating)

colour: silver grey, similar RAL 7001

Electrical properties

Nominal voltage U

/U in acc. to HAR: 300 / 500 V

U acc. to UL / CSA: 600 V

Test voltage core / core 3000 V AC

Mechanical and thermal properties

Min. bending radius occasional flexing: 12,5 x outer diameter

fixed installation: 4 x outer diameter

Summary of content (2 pages)

PAGE 1
U.I. Lapp GmbH DATA SHEET DB 0015003 ÖLFLEX® 150 valid from: 2014-03-11 Application ® ÖLFLEX 150 cables are oil resistant power and control cables for the European, North American and Canadian market, for occasional flexible use and fixed installation to normal mechanical load conditions. They are among others designed for use in dry, damp and wet rooms. Outdoor use: They may only be installed with UV protection and considering the temperature ® range.
PAGE 2
U.I. Lapp GmbH DATA SHEET DB 0015003 ÖLFLEX® 150 Temperature range valid from: 2014-03-11 occasional flexing: acc. to HAR -5 °C up to +70 °C max. conductor temp. acc. to UL / CSA -5 °C up to +90 °C max. conductor temp. fixed installation: acc. to HAR -40 °C up to +70 °C max. conductor temp. acc. to UL / CSA -40 °C up to +90 °C max. conductor temp. Oil resistance TM 5 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1 UL: 60 °C rating acc. to UL 758 CSA: CSA 22.2 No.