Manualshelf

Datasheet

ManualsBrandsLAPPKABEL ManualsIndustrial Data CablesControl wiring ÖLFLEX® 150 CY 2 x 1.5 mm² Grey 150 m
12
U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
150 CY
DB 0015703
valid from: 2014-03-11
Originator: KASC / PDC
approved: HAPF / PDC
Document: DB0015703EN
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX
®
150 CY cables are oil resistant power and control cables designed for the European, North American and Canadian
market, for occasional flexible use and fixed installation subject to normal mechanical load conditions. They are among oth-
ers designed for use in dry, damp and wet rooms. Outdoor use: They may only be installed with UV protection and consider-
ing the temperature range.
ÖLFLEX
®
150 CY cables are increased oil resistant and at room temperature they are widely
resistant to acids and caustic solutions. They are suitable for non-continuously recurring movement without tensile load.
Continuous operational movements, restricted guidance, usage of these cables in moving cable carriers or on motor drum
guidance or under a strain of more than 15 N/mm² are not allowed.
Application range: Plant engineering, industrial machinery, heating and air-conditioning systems
Application range:
plant engineering, industrial machinery, heating and air conditioning systems
HAR: DIN VDE 0298-300 resp. VDE 0298-300
acc. to UL: PVC-sheathed cables for external interconnection or internal wiring of electric and electronic equipment,
Use when getting in contact with oil not above +60 °C (60 °C oil rating)
acc. CSA: CSA AWM I A/B II A/B, cables for internal or external interconnection with or without mechanical load
Design
Design ≤ 61 cores: acc. to EN 50525-2-51 resp. VDE 0285-525-2-51
> 61 cores: based on EN 50525-2-51resp. VDE 0285-525-2-51
UL AWM Style 21098 or 2587, CSA C22.2 No. 210-11
Approvals UL AWM Style 21098 or 2587 (File No. E63634)
CSA AWM I A/B II A/B (File No. LL 53776)
≤ 61 cores:
acc. to H05VVC4V5 acc. to EN 50525-2-51 resp. VDE 0285-525-2-51
> 61 cores:
based on EN 50525-2-51resp. VDE 0285-525-2-51
Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5
Core insulation PVC compound TI2 acc. to DIN EN 50363-3 resp. VDE 0207-363-3
(UL/CSA 90°C rating)
Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor
black cores with white numbers acc. to DIN EN 50334 resp. VDE 0293-334
Inner sheath PVC compound TM 2 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1
(UL/CSA 90°C rating)
Screen braid of tinned copper, coverage = 85 % (nominal value)
Outer sheath PVC compound TM5 acc. to DIN EN 50363-4-1 resp. VDE 0207-363-4-1
(UL/CSA 90°C rating)
colour: silver grey, similar RAL 7001
Electrical properties
Nominal voltage U
0
/U in acc. to HAR: 300 / 500 V
U acc. to UL / CSA: 600 V
Test voltage core / core 3000 V AC
core / screen 3000 V AC

Summary of content (2 pages)