Datasheet

U.I. Lapp
GmbH
DAT
A SHEET
ÖLFLEX
®
CLASSIC 100 SY
DB 0016001
valid from: 2013-03-08
Originator: KASC / PDC
approved: HAPF / PDC
Document: DB0016001EN Page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX

CLASSIC 100 SY cables are connecting- and control cables for flexible use and fixed installation for medium me-
chanical use. They are for use in dry, damp and wet rooms. They may only be installed outdoors with UV-protection and in
observation of the temperature range. At room temperature they are generally resistant against acids, caustics solutions and
certain oils. ÖLFLEX

CLASSIC 100 SY suitable for freely moved without forced guidance and tensile stress. The braid of
galvanized steel-wires is an additional mechanical protection.
Application range:
ÖLFLEX

CLASSIC 100 SY cables are used as supply and flexible connecting cable in plant engineering, in industrial ma-
chinery and in heating and air conditioning systems.
Design
Design based on
EN 50525-2-51 resp. VDE 0285-525-2-51 / HD 21.13 S1 + A1 resp. VDE 0281-13
Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5
Core insulation PVC compound TI2 acc. to EN 50363-3 resp. VDE 0207-363-3 with increased
requirements acc. to Lapp specification
Core identification acc. to. VDE 0293-1, with or without GN/YE protective conductor
with up to 5 cores: acc. to VDE 0293-308 / HD 308 S2
more than 5 cores: acc. to LAPP-ÖLFLEX

color code
Inner sheath PVC compound TM2 acc. to EN 50363-4-1 resp. VDE 0207-363-4-1
colour: silver grey, similar RAL 7001
Braid galvanized steel-wires, coverage = 70 % (nominal value)
Outer sheath PVC compound TM2 in acc. to EN 50363-4-1 resp. VDE 0207-363-4-1
colour: transparent
Electrical properties
Nominal voltage up to 1, 5 mm
2
: U
0
/ U 300 / 500 V
from 2, 5 mm
2
: U
0
/ U 450 / 750 V
from 2, 5 mm
2
, fixed and protected installation: U
0
/ U 600 / 1000 V
Test voltage Core/Core: 4000 V AC
Core/Screen: 4000 V AC
Mechanical and thermal properties
Min. bending radius occasional flexing: 20 x outer diameter
fixed installation: 6 x outer diameter
Temperature range occasional flexing: -5 °C up to +70 °C max. conductor temp.
fixed installation: -40 °C up to +80 °C max. conductor temp.
Flammability acc. to IEC 60 332.1 resp. VDE 0482-332-1-2
Tests acc. to IEC 60811, EN 50395, EN 50396
EC-Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive) and
2011/65/EU (RoHS, Restriction of the use of certain hazardous substances).