Datasheet

U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
ROBUST 210
valid from: 03.11.2009
Originator: H. Schillinger/ PDC
approved: H. Pfeffer / PDC
Document: DB0021880EN page 1 of 1
All deviations from this specification are subject to explicit consent of U.I. Lapp GmbH. All rights reserved acc. to DIN 34.
PD 0019/02_10.09EN
Application
ÖLFLEX

ROBUST 210 cables are control cables for flexible use and fixed installation for a robust mechanical use. They are
for use in dry, damp and wet rooms. Under following to the indicate temperature range is an use outside possible. At room
temperature they are increased resistant against acids, caustics solutions and certain oils, greases, waxes of vegetable,
animal, mineral and/or synthetic basis. ÖLFLEX

ROBUST 210 cables are used as flexible control cable in machine tool
manufacture, plant engineering, in power stations, in heating and air conditioning installations, agriculture, food-, pharma-
ceutical- and cosmetically industry, in composting- and sewage plants, by the production of textile fiber, of water based
purification plants by industrial and private use. Suitable for freely moved, not permanently recurrent movement without
forced guidance and tensile stress.
Technical data
Design based on HD 21.13 S1 resp. VDE 0281-13
Conductor bare copper, fine wire strand in accordance to IEC 60228 resp. VDE 0295, class 5
Core insulation Special PP based compound
Identification Black cores with white numbers with or without GN/YE ground conductor
acc. to DIN EN 50334 resp. VDE 0293-334
Outer sheath TPE compound, black
Nominal voltage 300 / 500 V
Test voltage 4000 V AC
Min. bending radius occasional flexing: 15 x cable diameter
fixed installation: 4 x cable diameter
Temp. range occasional flexing: -40 up to +80° C max. conductor temperature
fixed installation: -50 up to +80° C max. conductor temperature
Tests acc. to IEC 60811 resp. VDE 0473 and VDE 0472
EC directive This cable is conform to ECD 2006/95/EC (Low Voltage Directive).