Datasheet

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

ROBUST 215 C

valid from: 03.11.2009

Originator: H. Schillinger / PDC

approved: H. Pfeffer / PDC

Document: DB0022700EN page 1 of 1

PD 0019/02_10.09EN

Application

ÖLFLEX



ROBUST 215 C cables are screened control cables for flexible use and fixed installation for a robust mechanical

use. They are for use in dry, damp and wet rooms. Under following to the indicate temperature range is an use outside pos-

sible. At room temperature they are increased resistant against acids, caustics solutions and certain oils, greases, waxes of

vegetable, animal, mineral and/or synthetic basis. ÖLFLEX



ROBUST 215 C cables are used as flexible control cable in ma-

chine tool manufacture, plant engineering, in power stations, in heating and air conditioning installations, agriculture, food-,

pharmaceutical- and cosmetically industry, in composting- and sewage plants, by the production of textile fiber, of water

based purification plants by industrial and private use. Suitable for freely moved, not permanently recurrent movement with-

out forced guidance and tensile stress. The screen is a protection against electrical interference.

Technical data

Design based on HD 21.13S1 resp. VDE 0281-13

Conductor bare copper, fine wire strand in accordance to IEC 60228 resp. VDE 0295, class 5

Core insulation Special PP based compound

Identification Black cores with white numbers with or without GN/YE ground conductor

acc. to DIN EN 50334 resp. VDE 0293-334

Wrapping insulated foil of plastic

Screen braid of tinned copper, coverage = 85 % (nominal value)

Outer sheath TPE compound, black

Nominal voltage 300 / 500 V

Test voltage core/core: 4000 V AC

core/screen: 2000 V AC

Min. bending radius occasional flexing: 20 x cable diameter

fixed installation: 6 x cable diameter

Temp. range occasional flexing: -40 up to +80° C max. conductor temperature

fixed installation: -50 up to +80° C max. conductor temperature

Tests acc. to IEC 60811 resp. VDE 0473 and VDE 0472

EC directive This cable is conform to ECD 2006/95/EC (Low Voltage Directive).

PAGE 1
U.I. Lapp GmbH DATA SHEET ÖLFLEX® ROBUST 215 C valid from: 03.11.2009 Application ÖLFLEX ROBUST 215 C cables are screened control cables for flexible use and fixed installation for a robust mechanical use. They are for use in dry, damp and wet rooms. Under following to the indicate temperature range is an use outside possible. At room temperature they are increased resistant against acids, caustics solutions and certain oils, greases, waxes of vegetable, animal, mineral and/or synthetic basis.