Datasheet

U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX
®
FD 855 P
DB 0027530
valid from: 08.09.2011
Originator: HESC1 / PDC
approved: HAPF1 / PDC
Document: DB0027530EN Page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX

FD 855 P cables are oil-resistant control and supply cables with an outer sheath of Polyurethane for especially high
flexible use and fixed installation under medium mechanical load conditions. They are among others designed for use in dry,
damp or wet rooms. Considering the indicated temperature range an outdoor use is possible. ÖLFLEX

FD 855 P cables are
increased oil resistant and at room temperature widely resistant to acids and caustic solutions. The Polyurethane outer
sheath is resistant against high mechanical load, particularly to abrasion and scouring, cut resistant, microbe-proof and
hydrolysis resistant. They are especially for use in power chains, also for long travel distance and high speed, handling tools
and in permanently moved machine parts. Usage of these cables in moving cable carriers or on motor drum guidance or
under a tensile strain of more than 15 N/mm
2
conductor cross-section is not allowed. The used materials are halogen-free.
Application range:
Power chains or moving machine parts, machine tools and transfer lines, mechanical engineering, construction machinery,
control and regulation circuits. assembly lines, production lines, in all kinds of machines.
Design
Design based on HD 21.13 S1 +A1 resp. VDE 0281-13 and HD 22.10 S2 resp. VDE 0282-10
Conductor extra fine wire strands of bare copper acc. to IEC 60228 resp. VDE 0295, Class 6
Core insulation TPE (Thermoplastic Elastomer)
Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor
black cores with white numbers
acc. to DIN EN 50334 resp. VDE 0293 part 334
Outer sheath Polyurethane-compound TMPU acc. to EN 50363-10-2 resp. VDE 0207-363-10-2
Colour: Grey, similar RAL 7001
Electrical properties
Nominal voltage U
0
/U: 300/500 V
Test voltage Core/Core: 3000 V AC
Mechanical and thermal properties
Min. bending radius flexing: 5 x cable diameter
fixed installation: 3 x cable diameter
Temperature range flexing: -40 °C up to +80 °C max. conductor temp.
fixed installation: -50 °C up to +80 °C max. conductor temp.
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2
Oil resistance acc. to EN 50363-10-2 resp. VDE 0207-363-10-2
Halogen free acc. to VDE 0472-815
MUD resistance acc to IEC 61892-4 Annex D
Travel distance in power chains typical 50 m, max. 100 m (horizontal)
Tests acc. to IEC 60811 resp. VDE 0473 part 811, VDE 0472, EN 50395
EC directive This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive)
and 2002/95/EC (RoHS, Restriction of the use of certain hazardous substances).