Datasheet

U.I. Lapp

GmbH

DATA SHEET

UNITRONIC FD CP (TP) plus

DB0030961

valid from: 11.02.2011

Product Developement Cable

Document: DB0030961DE page 1 of 1

PD 0019/2.2_11.10EN

Application

UNITRONIC FD CP (TP) plus is a high flexible, screened and twisted pair data cable with an outer sheath of PUR.

The cable with low capacitance is designed especially for use in power chains, automatic manipulators, in permanently

moved machines parts.

The cable is increased oil-, abrasion- and cut resistant, in addition microbe- and hydrolysis resistant. It is cold-resistant and

for harsh environmental conditions.

Decoupling by means of twisted pair cable design and the screen protects against interference.

Approbation: c(UL)us, Type CMX according to UL 444 and CSA C22.2 No. 214-02

Design

Conductor superfine wire strands of bare copper wires

Insulation special Polyolefin-based compound

Core identification code accoding to DIN 47100

Stranding cores twisted to pairs, pairs are stranded in layers, wrapping with fleece on the outer

layer

Screen Braiding with tinned copper wires, wrapping with fleece on the screen

Outer sheath special PUR-based compound, flame retardant, halogen free

colour: grey (RAL 7001)

Electrical properties at 20°

Specific insulation resistance > 5 G Ω x km

Mutual capacitance up to 0.5 mm²: approx. 60 nF/km

up to 1 mm²: approx. 70 nF/km

Inductivity approx. 0.65 mH/km

Peak working voltage 250 V (not for power applications)

Test voltage C/C: 1500 V

C/S: 500 V

Mechanical and thermal properties

Bending radius 7.5 x cable Ø

Temperature range Flexing: - 40˚C up to +80˚C

Fixed installation: - 40˚C up to +80˚C

up to +75˚C acc. to UL/CSA

Flammability flame retardant acc. to IEC 60 332-1-2 and VW-1 acc. to UL-1581

Design based on standard VDE 0812