Datasheet

DATA SHEET

0034200

UNITRONIC® JE-LiYCY…BD

valid from:

05.08.2009

Erstellt: TE-K, Petra Samek Dokument: DB0034200EN03 S

eite 1/1

Alle Abweichungen von diesen Angaben bedürfen der Zustimmung Wir behalten uns alle Rechte gemäß DIN 34 vor.

Nr.: 0018/0408

APPLICATION

NITRONIC® JE-LiYCY…BD is a connecting cable for industrial electronics. It can be used in measurement and

control engineering and also as pulse and data transmission cable.

The cable is suited for limited flexing use and fixed installation in dry and wet rooms on and under plaster.

The cable is manufactured according to DIN VDE 0815. The requests for make-up and electrical quality of this

norm are fulfilled.

DESIGN

esign: nach DIN VDE 0815, table 5, Bauart JE-LiYCY…BD

TECHNICAL DATA

Electrical properties nach DIN VDE 0815, table 11, Bauart JE-LiYCY…BD

Operating peak voltage (not for power use) 225 V

Test voltage C/C 500 V

Test voltage C/C 2000 V

Loop resistance 78,4 Ohm/km

Specific insulation resistance > 100 MOhm x km

Mutual capacitance 100 nF/km

Coupling 200 pF/100m

Inductance 0,65 mH/km

Minimum bending radius flexing 15 x cable diameter

Minimum bending radius fixed installation 5 x cable diameter

Temperature range flexing -5 C to +50 C

Temperature range fixed installation -30 C to +70 C

Flammability flame retardant acc. to IEC 60332-1-2

Tests at the cable acc. to DIN VDE 0815, Tabelle 21

PAGE 1
DATA SHEET 0034200 valid from: UNITRONIC® JE-LiYCY…BD 05.08.2009 APPLICATION UNITRONIC® JE-LiYCY…BD is a connecting cable for industrial electronics. It can be used in measurement and control engineering and also as pulse and data transmission cable. The cable is suited for limited flexing use and fixed installation in dry and wet rooms on and under plaster. The cable is manufactured according to DIN VDE 0815. The requests for make-up and electrical quality of this norm are fulfilled.