Datasheet
DATA SHEET
0035001
ÖLFLEX
®
CLASSIC 100 CY
valid from :
05.05.2006
elaborated by:
TE-K: M. Herb
Document: DB0035001EN page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX
®
CLASSIC 100 CY cables are power- and control cables for flexible use and fixed installation for
medium mechanical use. They are for use in dry, damp and wet rooms. They may only be installed outdoors with
UV-protection and in observation of the temperature range. At room temperature they are generally resistant
against acids, caustics solutions and certain oils. ÖLFLEX
®
CLASSIC 100 CY cables are used as supply and
flexible connecting cable in machine tool manufacture, plant engineering, in power stations, in heating and air
conditioning installations, etc. Suitable for freely moved without forced guidance and tensile stress.
The screen is a protection against electrical interference.
Technical data
Conductor bare copper, fine wire strand in accordance to IEC 60228, that is VDE 0295, class 5
Design in accordance to HD 21.13 S1 that is VDE 0281-13
Core insulation LAPP special PVC compound P 8/1, better than the PVC compound TI2 in
accordance to VDE 0281-1.
Identification Up to 5 cores color-coded in acc. to HD 186 resp. VDE 0293.
or HD308S2 that is VDE 0293-308, cables with more than 5 cores are color-coded
in acc. to LAPP ÖLFLEX
®
color code.
Inner sheath PVC compound TM2 in acc. to VDE 0281-1
Screen Braid of tinned copper, coverage = 85 % (nominal value)
Transfer impedance in acc. to HD 21.13 S1 250mΩ/m at 30 MHz
Outer sheath PVC compound TM2 in acc. to VDE 0281-1 with increased requests
to LAPP specification
Nominal voltage 0,5 mm
2
to 1,0 mm
2
: 300 / 500 V
from 1,5 mm
2
: 450 / 750 V
from 1,5 mm
2
, fixed and protected installation: 600 / 1000 V
Test voltage 4000 V AC
Temp. range for flexible use -5 up to +70° C max. conductor temperature
fixed installation -40 up to +80° C max. conductor temperature
Min. bending radius flex. use: 20 x cable diameter
fixed installation: 6 x cable diameter
Flame retardant in acc. to IEC 60 332.1
Tests in acc. to VDE 0472 and IEC 60 811-x.x that is VDE 0473
EC directive This cable confirms to ECD 73/23/EEC (low voltage directive).