Datasheet

DATA SHEET
DB0037302
valid from: 19.06.2015
Originator: PESA / PDC
approved: HAPF / PDC
Document: DB0037302DE
page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
is a halogen free, screened data cable for low frequency applications. The cable is designed for fixed
installation and for conditional flexible use. It is used in dry and damp interiors but not appropriate for outside usage. The
screen provides protection against electromagnetic interferences.
The cable is used for data processing, measurement and control engineering, safety related systems and as electronic cables.
Design
Design
Design based on standard VDE 0812
Conductor
fine wire strands of bare copper wires
Insulation
special Polyolefin-based compound
Core identification code
according to DIN 47100
Stranding
cores are stranded in layers,
wrapping with foil on the outer layer
Screen
Braiding with tinned copper wires
Outer sheath
special halogen-free compound
colour: pebble grey (RAL 7032)
Electrical properties at 20°C
Conductor resistance
Cross section
max.
[mm²]
[Ω/km]
0.14
0.25
0.34
0.5
0.75
1.0
1.5
138.0
79.0
57.0
39.0
26.0
19.5
13.3
Specific insulation resistance
> 20 G Ω x cm
Mutual capacitance
C/C: approx. 80 nF/km
C/S: approx. 120 nF/km
(at 800 Hz)
Inductivity
approx. 0.65 mH/km
Peak working voltage
250 V (not for power applications)
Test voltage
1200 V
Mechanical and thermal properties
Minimum bending radius
Flexing: 15 x cable Ø
Fixed installation: 6 x cable Ø
Temperature range
Flexing: - 5˚C up to +70˚C
Fixed installation: - 40˚C up to +80˚C
Flammability
flame retardant acc. to IEC 60332-1-2
Halogen free
according to IEC 60754-1
Corrosivity of gases
according to IEC 60754-2
Smoke density
according to IEC 61034-2
Toxicity
according to DIN EN 50305
General requirements
This cable is conform to the EU-Directive 2011/65/EU
(RoHS, Restriction of the use of certain hazardous substances).