Datasheet

U.I. Lapp
GmbH
DATA SHEET
ÖLFLEX HEAT 180 EWKF
DB0046500
valid from: 16.02.2012
Originator: PESA / PDC
approved: HAPF / PDC
Document: DB0046500DE page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX HEAT 180 EWKF are screened notch resistant silicone cables with increased mechanical characteristics designed
for use as power and control cables at high ambient temperatures. The use of these cables is recommended for example in
the following fields:
Steel and iron works, cement and ceramic works, bakery equipment and industrial furnaces, electric motor industry, sauna
and solarium construction, thermal and heating elements, lighting technology, ventilator engineering, air conditioning
technology, galvanization technology and polymer processing, generator and transformer building, wind turbine engineering.
Design
Conductor
fine strands of tinned copper wires
Ins
u
l
ation
notch resistant silicone compound EI2 acc. to VDE 0207
-
363
-
1
Core identification code
starting at 3 cores with GN/YE ground conductor
up to 5 cores coloured acc. to VDE 0293-308
starting at 6 cores: Black cores with white numbers
Stranding
cores
are stranded in layers
7-core cables with 1+6 stranding
Outer sheath
notch resistant silicone compound EM9 acc. to VDE 0207
-
363
-
2
-
1
Black like RAL 9005
Electrical properties at 20°
Insulation resistance
> 200 G
Ω x cm
Rated voltage
300/500 V
Test
voltage
core/core 2000 V
Mechanical and thermal properties
Bending radius
occasional flexing: 15 x cable Ø
fixed installation: 4 x cable Ø
Temperature range
occasional flexing:
-
25
˚C bis +180˚C
fixed installation: -50˚C bis +180˚C
(adequate ventilation provided)
temporary: +200˚C
Flammability
flame retardant in acc. with IEC 60332
-
1
-
2 resp.
VDE 0482
-
332
-
1
-
2
Halogen free
in acc. with IEC 60754
-
1
Corrosivity of gases
in acc. with IEC 60754
-
2
EC directive
This cable is conform to the EC
-
Directives 2006/95/EC (Low Voltage Directive)
and 2002/95/EC (RoHS, Restriction of the use of certain hazardous substances).
Design based on standard VDE 0285-525-2-83