Datasheet

DATA SHEET
0153007
DIN compensating cable KP 4 L-SIL-S 2x1,5 oval
valid from :
01.12.2008
Originator: Frank Hörtnagl / PD-KL
Approved: Werner Körner / TE
Document: DB0153007EN page 1 of 1
All deviations from this specification are subject to explicit consent of U.I.LAPP GmbH. All rights reserved acc. to DIN 34.
No.: 0019/0408
Application
The compensating cable KP 4 L-SIL-S 2 x 1,5 mm² is a silicone insulated cable which transmits the
thermoelectric voltage of PtRh/Pt thermocouples. It is for flexible use and fixed installation in dry rooms with low
mechanical load. They may only be installed outdoors with UV- and humidity protection and in observation of the
max. permitted temperature range.The steel wire armouring serves as mechanical protection.
Design
Conductor 1,5 mm² (48 x 0,20 mm)
Conductor material RCB/SCB alloying, accuracy class 2 according DIN 43722
Positive conductor: Cu (copper)
Negative conductor: CuNi (cupronickel)
Core insulation Silicone compound
Core identification Positive conductor: red
Negative conductor: white
Core layering Cores parallel next to each other
Outer sheath Silicone compound, colour: white
Armouring Galvanized steel wire braiding with interweaved white identification thread
Electrical properties
Limiting deviation class 2 ± 60 µV (± 5,0 °C) / me asuring point temperature +1000 °C
Mechanical and thermal properties
Temperature range occasional flexing: -25 °C up t o +180 °C
Minimum bending radius occasional flexing: 15 x cable diameter
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2