Datasheet

DATA SHEET
0157513
DIN compensating cable KN 9 L-SY 2x1,5
valid from :
01.12.2008
Originator: Frank Hörtnagl / PD-KL
Approved: Werner Körner / TE
Document: DB0157513EN page 1 of 1
All deviations from this specification are subject to explicit consent of U.I.LAPP GmbH. All rights reserved acc. to DIN 34.
No.: 0019/0408
Application
The compensating cable KN 9 L-SY 2 x 1,5 mm² is a PVC insulated cable with steel wire armouring which
transmits the thermoelectric voltage of NiCr/Ni thermocouples. It is for flexible use and fixed installation in dry and
damp rooms with medium mechanical load. They may only be installed outdoors with UV protection and in
observation of the max. permitted temperature range.The steel wire armouring serves as mechanical protection.
Design
Conductor 1,5 mm² (48 x 0,20 mm)
Conductor material KCA alloying, accuracy class 2 according DIN 43722
Positive conductor: Fe (iron)
Negative conductor: CuNi (cupronickel)
Core insulation PVC compound
Core identification Positive conductor: red
Negative conductor: green
Core layering Cores twisted together
Inner sheath PVC compound, colour: green
Armouring Galvanized steel wire braiding
Outer sheath PVC compound, colour: green
Electrical properties
Limiting deviation class 2 ± 100 µV (± 2,5 °C) / m easuring point temperature +900 °C
Mechanical and thermal properties
Temperature range occasional flexing: -5 °C up to +70 °C
Minimum bending radius occasional flexing: 15 x cable diameter
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2