Datasheet

DATA SHEET
015850X
DIN extension cable KEL ST XX x 2 x 1,5
valid from :
01.12.2008
Originator: Frank Hörtnagl / PD-KL
Approved: Werner Körner / TE
Document: DB0158500EN page 1 of 1
All deviations from this specification are subject to explicit consent of U.I.LAPP GmbH. All rights reserved acc. to DIN 34.
No.: 0019/0408
Application
The extension cables KEL Version ST XX x 2 x 1,5 mm² are twisted paired PVC insulated cables with aluminium
foil screen which transmit the thermoelectric voltage of Fe/CuNi thermocouples. They are for flexible use and
fixed installation in dry and damp rooms with medium mechanical load. They may only be installed outdoors with
UV protection and in observation of the max. permitted temperature range. The overlapping foil wrapping screens
the cores against electromagnetical interference.
Design
Conductor 1,5 mm² (48 x 0,20 mm)
Conductor material LX alloying, accuracy class 2 according DIN 43722
Positive conductor: Fe (iron)
Negative conductor: CuNi (cupronickel)
Core insulation PVC compound
Core identification Positive conductor: red
Negative conductor: blue
Core layering Cores twisted together
Screening Aluminium cladded plastic foil with tinned copper drain wire (7x0,30 mm)
Outer sheath PVC compound, colour: blue
Electrical properties
Limiting deviation class 2 ± 140 µV (± 2,5 °C) / m easuring point temperature +500 °C
Mechanical and thermal properties
Temperature range fixed installed: -40 °C upto + 80 °C
occasional flexing: -5 °C up to +70 °C
Minimum bending radius occasional flexing: 15 x cable diameter
Flammability flame retardant in acc. to IEC 60332-1-2 resp. VDE 0482-332-1-2