Datasheet

ManualsBrandsLAPPKABEL ManualsIndustrial Data CablesControl wiring ÖLFLEX® CLASSIC 130 H BK 3 G 1 mm² Black 50 m

U.I. Lapp

GmbH

DATA SHEET

ÖLFLEX

CLASSIC 130 H BK 0.6/1 kV

DB 1123410

valid from: 27.02.2012

Originator: ROKR / PDC

approved: HESC / PDC

Document: DB1123410EN Page 1 of 1

PD 0019/2.2_11.10EN

Application

ÖLFLEX

CLASSIC 130 H BK 0,6/1 kV are halogen free, flame retardant control cables for occasional flexible use and fixed

installation subject to normal mechanical load conditions. They are among others designed for use in dry and humid rooms.

Outdoor use: They may only be installed considering the indicated temperature range. They are not for use in continuously

recurring movement. Continuous movement, usage of these cables in moving cable carriers or on motor drum guidance or

under a tensile strain of more than 15 N/mm² conductor cross-section is not allowed.

Application range:

Public buildings, airports, railway stations, plant engineering, industrial machinery, heating and air-conditioning systems and

particularly where human and animal life as well as valuable property are exposed to high risk of fire hazards.

Design

Design based on HD 21.14 S1/ VDE 0281-14, EN 50525-3-11/VDE 0285-525-3-11

Conductor fine wire strands of bare copper, acc. to IEC 60228 resp. VDE 0295, Class 5

Core insulation halogen free compound TI6 acc. to HD 21.14 S1/ VDE 0281-14,

EN 50525-3-11/VDE 0285-525-3-11

Core identification acc. to VDE 0293-1, with or without GN/YE protective conductor

up to 5 cores coloured in acc. to HD 308 S2 that is VDE 0293-308

starting at 6 cores: Black cores with white numbers

acc. to DIN EN 50334 resp. VDE 0293-334

Outer sheath halogen free compound TM7 acc. to HD 21.14 S1/ VDE 0281-14,

EN 50525-3-11/VDE 0285-525-3-11

colour: Black

Electrical properties at 20 °C

Nominal voltage U

/U: 600 / 1000 V

Test voltage 4000 V AC

Mechanical and thermal properties

Min. bending radius occasional flexing: 15 x cable diameter

fixed installation: 4 x cable diameter

Temperature range occasional flexing: -15 °C up to +70 °C max. conductor temperature

fixed installation: -40 °C up to +80 °C max. conductor temperature

Flammability flame retardant in acc. with IEC 60332-1-2 resp. VDE 0482-332-1-2

no flame propagation

in acc. with IEC 60332-3-24 resp. EN 50266-2-4 resp. VDE 0482 part 266-2-4 or

in acc. with IEC 60332-3-25 resp. EN 50266-2-5 resp. VDE 0482 part 266-2-5

Smoke density acc. to IEC 61034-2

Toxicity acc. to NES 713 part 3

Halogen-free acc. to IEC 60754-1

Corrosivity acc. to IEC 60754-2

UV resistance UV and weather-resistant acc. to ISO 4892-2

Ozone resistance Ozone-resistant acc. to EN 50396

Tests acc. to IEC 60811, EN 50395, EN 50396

EC Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive)

and 2002/95/EC (RoHS, Restriction of the use of certain hazardous substances).

Summary of content (2 pages)

PAGE 1
U.I. Lapp GmbH DATA SHEET ÖLFLEX® CLASSIC 130 H BK 0.6/1 kV DB 1123410 valid from: 27.02.2012 Application ® ÖLFLEX CLASSIC 130 H BK 0,6/1 kV are halogen free, flame retardant control cables for occasional flexible use and fixed installation subject to normal mechanical load conditions. They are among others designed for use in dry and humid rooms. Outdoor use: They may only be installed considering the indicated temperature range. They are not for use in continuously recurring movement.
PAGE 2
U.I. Lapp GmbH DATA SHEET ÖLFLEX® CLASSIC 130 H BK 0.6/1 kV DB 1123410 valid from: 27.02.2012 Application ® ÖLFLEX CLASSIC 130 H BK 0,6/1 kV are halogen free, flame retardant control cables for occasional flexible use and fixed installation subject to normal mechanical load conditions. They are among others designed for use in dry and humid rooms. Outdoor use: They may only be installed considering the indicated temperature range. They are not for use in continuously recurring movement.