Datasheet

DATA SHEET
1125752
ÖLFLEX
®
CLASSIC 110 SY
valid from :
19.02.2006
elaborated by:
TE-K:
Document: DB1125752EN page 1 of 1
Nr.: 0019/0894
Application
ÖLFLEX

CLASSIC 110 SY cables are VDE approved control- and connecting cables for flexible use and fixed
installation for medium mechanical use. They are for use in dry, damp and wet rooms. They may only be installed
outdoors with UV-protection and in observation of the temperature range. At room temperature it is generally
resistant against acids, caustics solutions and certain oils. ÖLFLEX

CLASSIC 110 SY cables are used as supply
and interconnecting cable for controlling machine tools, production lines, control equipment on conveyors, also
for use in measuring regulating and computer units. Suitable for freely moved without forced guidance and tensile
stress. The braid of galvanized steel wires are an additional mechanical protection. ÖLFLEX

CLASSIC 110 SY
may not be stored outside.
Technical data
Conductor bare copper, fine wire strand in accordance to IEC 60 228
that is VDE 0295, class 5
Design in accordance to HD 21.13S1 that is VDE 0281-13 and VDE 0245-102
(draft), partly in support
Core insulation LAPP special PVC-compound P8/1, better than the PVC compound TI2 in
accordance to VDE 0207 part 4
Identification in acc. to HD 186 resp. VDE 0293, black cores with
white numbers with or without green/yellow ground conductor
Inner sheath PVC compound TM2 in acc. to VDE 0207 part 5 with increased requests
to LAPP specification
Braid braid of galvanized steel-wires, coverage = 70 % (nominal value)
Outer sheath PVC compound TM2 in acc. to VDE 0207 part 5 with increased requests
to LAPP specification
Nominal voltage 300 / 500 V
Test voltage 4000 V AC
Temp. range for flexible use -5 up to +70° C max. conductor temperature
fixed installation -40 up to +80° C max. conductor temperature
Min. bending radius flex. use : 20 x cable diameter
fixed installation: 6 x cable diameter
Flame retardant in acc. to IEC 60 332.1
Tests in acc. to VDE 0472 and IEC 60 811-x.x that is VDE 0473
Approvals VDE - Reg. No.: 7030
EC directive This cable confirms to ECD 73/23/EEC (low voltage directive).