Datasheet

U.I. Lapp
GmbH
DAT
A SHEET
ÖLFLEX
®
CLASSIC 400 CP
DB 1313852
valid from: 2013-07-12
Originator: KASC / PDC
approved: HAPF / PDC
Document: DB1313852EN Page 1 of 1
All rights reserved acc. to DIN ISO 16016.
PD 0019/2.2_11.10EN
Application
ÖLFLEX

CLASSIC 400 CP cables are oil resistant control cables with a Polyurethan outer sheath, for flexible use and fixed
installation for medium mechanical abuse. They are for use in dry, damp and wet rooms. With consideration to the specified
temperature range it‘s possible to use it outside. ÖLFLEX

CLASSIC 400 CP cables are increased oil resistant and at room
temperature generally resistant against acids and caustics solution. The outer sheath is resistant against high mechanical
abuse, particularly to abrasion and cutting. It is microbe-proof and hydrolysis resistant.
Continuous, busy movements, usage of these cables in moving cable carriers, respectively on motor drum guidance or under
a strain of more than 15 N/mm² is not allowed. The screen is a protection against electrical interference.
Application range:
ÖLFLEX

CLASSIC 400 CP cables are for use as control - and power cable for machine tools and mechanical engineering.
Design
Design based on
EN 50525-2-51 resp. VDE 0285-525-2-51 / HD 21.13 S1+A1 resp. VDE 0281-13
EN 50525-2-21 resp. VDE 0285-525-2-21 / HD 22.10 S2 resp. VDE 0282-10
Conductor bare copper, fine wire strand in acc. to IEC 60228 resp. VDE 0295, class 5
Core insulation LAPP special PVC compound P8/1, better than the PVC compound TI2,
acc. to EN 50363-3 resp. VDE 0207-363-3
Core identification acc. to VDE 0293-1, with or without GN/YE ground conductor
black cores with white numbers
acc. to DIN EN 50334 resp. VDE 0293 part 334
Inner sheath PVC compound TM2 acc. to EN 50363-4-1 resp. VDE 020-363-4-1
Screen braid of tinned copper, coverage = 85 % (nominal value)
Outer sheath Polyurethane compound TMPU acc. to EN 50363-10-2 resp. VDE 0207-363-10-2
colour: silver grey, similar RAL 7001
Electrical properties
Nominal voltage U
0
/U: 300 / 500 V
Test voltage Core / Core: 4000 V AC
Core / Sreen: 4000 V AC
Mechanical and thermal properties
Min. bending radius occasional flexing: 20 x cable diameter
fixed installation: 6 x cable diameter
Temperature range occasional flexing: -5 °C up to +70 °C max. conductor temp.
fixed installation: -40 °C up to +80 °C max. conductor temp.
Oil resistance acc. to EN 50363-10-2 resp. VDE 0207-363-10-2
UV resistance acc. to EN ISO 4892-2-2006, method A (change of colour allowed)
Ozone resistance acc. to EN 50396 resp. VDE 0473-396, method B
Tests acc. to IEC 60811, EN 50395, EN 50396
EC Directives This cable is conform to the EC-Directives 2006/95/EC (Low Voltage Directive)
and 2011/65/EU (RoHS, Restriction of the use of certain hazardous substances).